Laboratory Vacuum Emulsification Reactor
Application:
Laboratory vacuum emulsification reactor: realize the process of
material dispersion, emulsification, homogenization and mixing
under vacuum or pressure environment. It can be equipped with a
variety of high-viscosity stirrers, high-shear homogenizers, and
reliable vacuum sealing systems and temperature control systems.
Various sensing and detection systems can simulate industrial
production in a laboratory environment. At present, the laboratory
processing capacity is: 1L, 2L and other series. It is used for
dispersion, mixing, emulsification, homogenization, stirring and
dissolving in the laboratory. The whole reaction process of
stirring, homogenizing, emulsifying, dispersing, mixing, etc. of
the material can be observed through a glass kettle under vacuum or
pressure conditions, and it can also be homogeneously emulsified
and dispersed by stainless steel pressure and high temperature.
Main features:
● Production of cheeses, lotions, lotions and preparations of fats
in the pharmaceutical and cosmetic industries;
● Mix solids such as calcium carbonate, talc, titanium oxide, etc.
with the emulsion;
● High shear dispersion emulsification or polymer polymerization
reaction stirring in lithium battery industry;
● Grinding and dispersing solids and fibers in liquids and
polymers. Such as glue strong vacuum stirring;
● It can measure the temperature, pressure, viscosity, PH, etc. of
materials at the same time. The material can also be heated or
cooled.
| Technical Parameters: |
| Model | HR-2L |
| Item no | 1018002001 |
| Power Supply | 220V 50/60HZ |
| Max mixing capacity(ml) | 500-2000 |
| Max emulsification(ml) | 1000-2000 |
| Working Temperature(℃) | 170 |
| Reach vacuum | -0.097---0.02mpa |
| Viscosity | 100000mpas |
| Mixing Speed Range | 0-230rpm |
| Propeller | Anchor type ribbon scraping wall stirring slurry |
| Scraper Material | Silicone Rubber |
| Homogenizer motor power | 1050W |
| Homogenizer speed | 7500-30000rpm |
| Working head | 25DG |
| Reactor lid opening | Homogenizer port + hopper port + temperature measuring port +
vacuum port + 3 spare ports |
| Lifting bracket distance | 350mm |
| Sample touch material | SS316L,borosilicate glass,FKM10 |
| Outer diameter of vacuum port | 10mm |
| Outer diameter of inlet and outlet of glass kettle jacket | 12mm |
| Allowable ambient temperature(℃) | 5-40 |
| Allowable ambient Humidity(%) | 80 |
| Exterior Dimension(mm) | 400*390*780 |
| Standard weight(kg) | 38 |
