metal detector scanner belt conveyor metal detectors High
sensitivity
Product Description:
CXJ-B series metal detector (CXJseries metal detector) is a model
specially developed for detecting metals in magnetic and non-magnetic
material belt conveyor systems (such as ferrous and non-ferrous
metal mines, iron and steel plants, sintering plants, etc.). It can
detect the "material effect" produced by magnetic ores with a
material grade below 70%. When harmful metals in the material pass
through the sensor, the metal detector alarms and gives a control
signal. The sensor is a window design, without partition tape, and
is easy to install.
The metal detector mainly consists of two parts: a CNC box and a
sensor. It uses advanced digital processing technology to
automatically analyze the composition and grade of the ore, plant
effect compensation, dedicated chip digital electrical appliances,
and digital phase shift detection, multi-frequency, and
multi-channel technology. It has stable performance, high detection
sensitivity, and strong anti-interference ability. It is suitable
for belt conveyors in various industries such as thermal power
generation, metallurgy, coal, cement, ore, etc., which are used for
conveying and processing systems of magnetic or non-magnetic bulk
materials. It can accurately detect various metal debris mixed in
the materials, such as iron, steel, manganese steel, stainless
steel, copper, aluminum, etc. It solves the problem that iron ore,
stone ore and other mining enterprises cannot use iron removers to
remove large pieces of iron, steel, manganese steel, etc., which
cause serious damage to the back-end equipment, and fills the
domestic gap in the field of metal detectors.
Features: Quantitative sensitivity adjustment, high sensitivity
design can detect super large metals and sound and light alarms.
Detection range: iron, aluminum, stainless steel, alloy and other
metals.
Timing function: delayed release after the relay is attracted, the
time is 1-10 seconds.
Control output: one pair of relay contacts is normally open, and
one pair is normally closed.
Installation method: The sensor is installed on the belt frame, and
the amplitude of the belt frame should be less than 0.5mm. When the
amplitude exceeds 0.5mm, the sensor bracket should be installed
separately.
Note: When the power supply voltage is unstable, a voltage
stabilizer should be used.
