Description:
Communications Adapter 4 is the latest generation of the
Communication Adapter group, and replaces the Comm Adapter II. This
is the only recommended communication device for ET 4,and the only
data link device that will allow you to properly communicate with a
CA engine on dual datalinks. This function is needed for some ET
(Electronic Technician) functions.
Feature:
1. Communication Adapter 4
2.Allows communication between service tools and engine controls
using various data links such as J1939/11, DeviceNet
(future release), CT DataLink, and J1708 (ATA) vehicle networks;
3.Flash program allows adapter firmware upgrades as additional
features become available;
4.Uses J1939/11, high-speed data link (part of ADEM III controls),
substantially reducing flash times;
5.Automatically selects J1939/11 when flashing the engine (reduces
the flash time approximately 80%, from 14 minutes to 3 minutes).
Function:
1.ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3.Fast hookup and real time display of systems status. Displays
,readings such as rpm, boost, pressures, temperatures, etc. for
Easy troubleshooting.
4.Identifies faulty sensors, harness connectors, and system
parameters which are out of specification. Allows customers
5.To help dealer identify problems without visiting machine.
6.Identifies intermittent sensors and wiring problems during
Machine operation and keeps a record of each one. Showswhen problem
occurred and how often it happened.
7.Added information to allow customer to assist dealer in
diagnosing and repairing problems. (Troubeshooting Help is not
built in with in the program, you will still need go back to books
in order to follow a repair description and steps in each Fault
Code display within the program).English and metric units of
measure integrated help file to easy learn the "How To" around the
software
.
1. Allows communication between service tools and engine controls
using various data links such as J1939/11, DeviceNet (future
release), forC AT DataLink, and J1708 (ATA) vehicle networks
2. Flash program allows adapter firmware upgrades as additional
features become available
3. Uses J1939/11, high-speed data link (part of ADEM III controls),
substantially reducing flash times
4. Automatically selects J1939/11 when flashing the engine (reduces
the flash time approximately 80%, from 14 minutes to 3 minutes).
Software Version:2024
Software version:
SIS Software latest version version
Price List Software
Flash Software
HIS HCIS File
Training Software
Hard Shell est with foam inserts
Language:English, Chinese, Danish, French, German, Italian, Japanese,
Portuguese, Russian, Spanish
