Hot Selling Plate and Frame Heat Exchanger With Gasket SS316L
Gasket Plate Heat Exchanger
| Model | BB60/BH60 |
| Cross Reference | TS6M |
| Height, H [mm] | 704 | 704 |
| Width, W [mm] | 400 | 410 |
| Min standard length, L [mm] | 530 | 540 |
| Max standard length, L [mm] | 1430 | 1440 |
| Vertical port distance, VC [mm] | 380 | 380 |
| Horizontal port distance, HC [mm] | 203 | 203 |
| Max temperature [°C] | 180 | 180 |
| Max pressure [barg] | 16 | 20.6 |
| Flange size | DN65/2'' | DN65/2'' |
| Max. flow rate [kg/s] | 20 |
(Measurment in mm, N means the number of the plates)
| Material of Plate | Suited Liquid Kinds |
| Stainless Steel (AISI304.316 Etc) | Pure Water, Normal Water, Oil for eating, Mineral Oil |
| Ti, Ti-pd | Sea Water, Saline Water, Mineral Water |
| 20Cr, 18Ni, 6Mo (254SMO) | Dilute Sulphuric Acid, Organic Water Solution |
| Ni | High-temp and concentration caustic soda |
| Hastelloy (C276, D205, B2G) | Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid |
| Material of Gasket | Operating Temperature ° C | Suited Liquid Kinds |
| NBR | -15~+135° C | Water, Sea Water, Mineral Oil, Salinous Water |
| EPDM | -25~+180° C | Hot Water, Steam, Acid, Alkali |
| F26 | -55~+230° C | Acid, Alkali |
| TPF | -0~+160° C | High Concentrated Acid, Alkali, High temperature Oil, Steam |
Baode heat exchanger is No,1 China brand in gaslekt plate heat
exchanger. The plate heat exchanger consists of a pack of
corrugated metal plates with portholes for the passage of the two
fluids between which heat transfer will take place. The plate pack
is assembled between a fix frame plate and a movable pressure plate
and compressed by tightening bolts. The plates are fitted with a
gasket which seals the inter plate channel and directs the fluids
into alternate channels. The number of plates is determined by the
flow rate, physical properties of the fluids, pressure drop and
temperature program. The plate corrugations promote fluid
turbulence and support the plates against differential pressure.
The frame plate and the pressure plate are suspended from an upper
carrying bar and located by a lower guiding bar, both of which are
fixed to a support column. Connections are located in the frame
plate or, if either or both fluids make more than a single pass
within the unit, in the frame and pressure plates.
Advantages of the Baode Gasket Plate Heat Exchanger *Space saving
and energy efficient Baode plate heat exchanger are the system
builder’s dream! With their compact designs they require 20–50%
less space in your system than a comparable shell-and-tube unit.
Since they require up to 80% less cooling media, you can fit
smaller pumps that will consume less energy
Working principle
Channels are formed between the plates and the corner ports are
arranged so that the two media fl ow through alternate channels.
The heat is transferred through the plate
between the channels, and complete counter-current flow is reated
for highest possible efficiency. The corrugation of the plates
provides the passage between the plates, supports each plate
against the adjacent one and enhances the turbulence, resulting in
efficient heat transfer.
STANDARD MATERIALS
Frame plate: Mild steel Epoxy painted
Nozzles: Carbon steel
Metal lined: Stainless steel, Titanium
Plates: Stainless steel Alloy 316 or Titanium
A great advance on conventional PHEs
Way ahead of shell-and-tubes
No thermal fatigue Cyclic heating and cooling produces thermal
fatigue in rigid steam heaters like straight shell-and-tubes. This
often results in cracked and worn components that demand
maintenance and repair, thereby causing unwanted system downtime.
The combination of thin plates and flexible gaskets in the BS
Series prevents thermal fatigue by allowing the units to expand and
contract in response to temperature changes. Fine temperature
control Rapid heat transfer resulting from the small hold-up volume
and high surface/volume ratio of the plates enables a fast response
to temperature control.
Application
Food industry: Milk pasteurization Milk and beverage pasteurization
, Wine tempering, Bottled water treatment , CIP (Cleaning-in-Place)
heating , Reverse osmosis water.
Marine application : Central cooling of the main or auxiliary
engines or turbines, Lubrication oil cooling, Recooling of
circulated water for cooling cylinders, pistons, injection nozzles,
Cooling of Baoder oil, compressor oil and other lubricants,
Preheating of lubrication oil and heavy fuel oil, Preheating of
seawater for fresh water production, Heat recovery, Heat exchange
to air-condition the passengers’ cabins and freight spaces
Others: turbine oil cooler, Chemical industry, district heating,
district cooling, swimming pool heating, solar heating,
Short delivery time.
High quality
Reasonable price
Customer made
Know-how design and customer support
