Machine main parameter
| Model | YT20S |
| Dimension |
| Length | 1480mm |
| Width | 2680mm |
| Height | 1650mm |
| Total Weight | 2380kg |
| PCB |
| PCB Length Width | Max:500*300mm(1200*450 option) Min:50*50mm |
| PCB Thickness | 0.5-5mm |
| PCB Clamping | Cylinder clamping, track width adjustable |
| Mounting Mode | Group picking and separate placingseparate picking and separate
placing |
| O.S. |
| System | Windows7 |
| Software | R&D independently |
| Display | LED monitor |
| Input Device | Keyboard, Mouse |
| Vision System |
| No. of Camera | 1 PCS (Head flight vision camera) |
| 2 PCS Mark camera |
| Mounting Precision | CHIP±0.03mm QFP±0.025mm Cpk ≧1.0 (3σ) |
| Mounting Height | ≦16mm (Other height can be customized) |
| Mounting Speed | 98000 CPH(Under best condition) |
| Components | 0201~12MM packaging material and IC material(Optional fixed camera
for 0201~35*35MM),Other component size can be customized |
| Components Space | 0.2mm |
| No. of Feeders Station | 104 PCS |
| No. of nozzles | 20 PCS |
| Power | 220AC 50HZ |
| Power Consumption | 1.5kw |
| Operating Environment | 23℃±3℃ |
| Transmission Speed | ＞1000mm/sec |
| Transmission Direction | Single(left→ right or right→ left) |
| Transmission Mode | Online drive |
| Position Mode | Optical |
| Gas consumption | 0.4-0.6mpa (4-6kgf/cm2)600N/min |
| Electrical control | Independent research and development by ETON |
| Motion control card module 1 set | Independent research and development by ETON |
| X,Y,Z Axis Drive way | High-end magnetic linear motor |
| Feeding way | Intelligent feeder with double motor |
| Production management MES system interface | Customized |
Company Introduction:
Our company participates in many exhibitions at home and abroad
every year,
You will see ETON’s booth in some well-known large-scale
exhibitions in China, including large-scale exhibitions held in
Shenzhen, Guangzhou, Chongqing, Shanghai and other places.
Foreign exhibitions include exhibitions in more than 20 countries
including Mumbai, Delhi, Egypt, Turkey, and Vietnam.
Service:
Maintenance period 1 year
One year warranty. during warranty. any parts that need to be
repaired and replaced will be free.
Software and hardware lifetime maintenance
Free upgrade software, the software is Reach and developed by ETON,
so we support whole lifetime free upgrade updates.
Visit customers regularly and gather information
Visit clients regularly. We attend the different exhibition in
different cities every year, at the same time, we will visit local
clients and support our service and collect feedback on customer
suggestions in time.
Provide the latest information about technology and equipment
We give professional technology suggestions to our clients. And
share the updated news with our clients
On-site service
We have some official site in India as Mumbai and New Delhi, also
have site in Egypt, Turkey that can provide service timely with our
engineers.
According to your needs, dedicated senior engineer will come to
your factory for free install and training you how to operate the
machine.
Packaging:
As for the packing of the products, we use vacuum packing to reduce
the damage of the products. After vacuum packing the machines, we
use wooden boxes to cover them to ensure the safety of the
machines.
What defects can X-ray detect in SMT process?
X-rays can inspect the internals of component soldering. It
utilizes the penetrating power of X-rays to detect problems such as
insufficient solder, poor soldering, and short-circuiting of solder
joints.
When defects such as pores, slag inclusions, and incomplete
soldering occur, bright spots or bright lines will be formed in the
defect area. Visually, we can judge whether there is a defect in an
area based on whether an area in the inspection image is brighter
than the surrounding background area. From the point of view of
image processing, we can judge whether an area is a defect
according to the pixel gray value in the flaw detection image.
The most likely causes of voids are the solder paste and the
components themselves. In the X-ray image, some "bubbles" can be
seen in the solder joints.
If there is a gray "bridge" between the solder joints, we can
basically judge that the solder is shorted.
If the amount of solder paste is abnormal or the SMT deviates, the
components may be displaced. Based on the X-ray inspection images,
the shadows of the pins and pads do not match, and we can see that
the components are misplaced.
Welding defects can be judged according to the grayscale and the
size of the solder joints.
Oxidation of PCB pads can lead to poor soldering. The image
presented by X-ray inspection is that the solder joint is
significantly larger than normal.
Insufficient solder paste or solder paste flowing into nearby vias
during reflow. On X-ray images, the solder joints are smaller than
normal.
Cold soldering is the incomplete fusion of SMT solder paste due to
insufficient soldering temperature and time during reflow
soldering. Usually not easy to spot, but X-ray inspection images
clearly show the problem.
Contact David
Whatsapp/Wechat: +86 13827425982
