| AC Voltage |
| Range¹ / resolution | | 600.0 mV / 0.1 mV
6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V
1000 V / 1 V |
| Accuracy2 3 4 | 45 Hz to 500 Hz | 1.0% + 3 |
| 500 Hz to 1 kHz | 2.0% + 3 |
1. All AC voltage ranges are specified from 1% of range to 100% of
range.
2. Crest factor of ≤ 3 at full scale up to 500 V, decreasing
linearly to crest factor < 1.5 at 1000 V.
3. For non-sinusoidial waveforms, add ±(2% of reading + 2% full
scale) typical, for crest factor up to 3.
4. Do not exceed 107 V-Hz. |
| DC Voltage, Continuity, Resistance, Diode Test and Capacitance |
| mV | Range / resolution | 600.0 mV / 0.1 mV |
| Accuracy | 0.09% + 2 |
| V | Range / resolution | 6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V
1000 V / 1 V |
| Accuracy | 0.09% + 2
0.15% + 2 |
| ))) | Range / resolution | 600 Ω / 1 Ω |
| Accuracy | Meter beeps at < 25 Ω, beeper detects opens or shorts of 250 μs
or longer. |
| Ω | Range / resolution | 600.0 Ω / 0.1 Ω
6.000 kΩ / 0.001 kΩ
60.00 kΩ / 0.01 kΩ
60.00 kΩ / 0.1 kΩ
600.0 kΩ / 0.001 MΩ
50.00 MΩ / 0.01 MΩ |
| Accuracy | 0.5% + 2
0.5% + 1
1.5% + 3 |
| Diode test | Range / resolution | 2.000 V / 0.001 V |
| Accuracy | 1% + 2 |
| µF | Range / resolution | 1000 nF / 1 nF
10.00 μF / 0.01 μF
100.0 μF / 0.1 μF
9999 μF1 / 1 μF |
| Accuracy | 1.2% + 2
10% typical |
| 1. In the 9999 μF range for measurements to 1000 μF, the
measurement accuracy is 1.2% + 2. |
| AC and DC Current |
mA AC
(45 Hz to 1 kHz) | Range1 / resolution | 60.00 mA / 0.01 mA
400.0 mA3/ 0.1 mA |
| Accuracy | 1.5% + 3 |
| mA DC2 | Range1 / resolution | 60.00 mA / 0.01 mA
400.0 mA3/ 0.1 mA |
| Accuracy | 0.5% + 3 |
1. All AC current ranges are specified from 5% of range to 100% of
range.
2. Input burden voltage (typical): 400 mA input 2 mV/mA.
3. 400.0 mA accuracy specified up to 600 mA overload. |
| Frequency |
| Range / resolution | 99.99 Hz / 0.01 Hz
999.9 Hz / 0.1 Hz
9.999 kHz / 0.001 kHz
99.99 kHz / 0.01 kHz |
| Accuracy1 | 0.1% + 1 |
| 1. Frequency is specified up to 99.99 kHz in volts and up to 10 kHz
in amps. |
| Input Characteristics |
 | Overload protection | 1100 Vrms |
| Input impedance (nominal) | > 10 MΩ < 100 pF |
Common mode rejection ratio
(1 kΩ unbalance) | > 120 dB at DC, 50 Hz or 60 Hz |
| Normal mode rejection | > 60 dB at 50 Hz or 60 Hz |
 | Overload protection | 1100 Vrms |
| Input impedance (nominal) | > 10 MΩ < 100 pF |
Common mode rejection ratio
(1 kΩ unbalance) | > 60 dB, DC to 60 Hz |
| Normal mode rejection | > 60 dB at 50 Hz or 60 Hz |
 | Overload protection | 1100 Vrms |
| Input impedance (nominal) | > 10 MΩ < 100 pF |
Common mode rejection ratio
(1 kΩ unbalance) | > 120 dB at DC, 50 Hz or 60 Hz |
| Normal mode rejection | > 60 dB at 50 Hz or 60 Hz |
| Open Circuit Test Voltage |
 | Overload protection | 1100 Vrms |
| Input impedance (nominal) | < 2.7 VDC |
Full scale voltage to 6 MΩ
Full scale voltage 50 MΩ | < 0.7 VDC
< 0.9 VDC |
| Typical short circuit current | < 350 mA |
 | Overload protection | 1100 Vrms |
| Input impedance (nominal) | < 2.7 VDC |
Full scale voltage to 6 MΩ
Full scale voltage 50 MΩ | 2.000 VDC |
| Typical short circuit current | < 1.1 mA |
| mA Function |
| Overload protection | Fused, 44/100 A, 1000 V FAST Fuse |
| Overload | 600 mA overload for 2 minutes maximum, 10 minutes rest minimum |
| MIN/MAX Recording Accuracy |
| DC functions | ±12 counts for changes > 350 mS in duration. |
| AC functions | ±40 counts for changes > 900 mS in duration. |
| General Specifications |
| Maximum voltage between any terminal and earth ground | 1000 VDC or AC rms |
| Ω fuse protection from A inputs | 0.44 A (44/100 A, 440 mA), 1000 V FAST Fuse, Fluke specified part
only |
| Display (LCD) | Update rate | 4/sec |
| Volts, amps, ohms | 6000 counts |
| Frequency | 10,000 counts |
| Capacitance | 1,000 counts |
| Battery type | Three AA Alkaline batteries, NEDA 15A IEC LR6 |
| Battery life | 250 hours minimum |
| RF communications | 2.4 GHZ ISM Band |
| RF communication range | Open air, unobstructed | Up to 20 m |
| Obstructed, sheetrock wall | Up to 6.5 m |
| Obstructed, concrete wall, or steel electrical enclosure | Up to 3.5 m |
| Temperature | Operating | -10°C to 50°C |
| Storage | -40°C to 60°C |
| Temperature coefficient | 0.1 x (specified accuracy) / °C (< 18°C or > 28°C) |
| Relative humidity | 0% to 90% (0°C to 35°C)
0% to 75% (35°C to 40°C)
0% to 45% (40°C to 50°C) |
| Altitude | Operating | 2,000 m |
| Storage | 12,000 m |
Electromagnetic compatibility
EMI, RFI, EMC, RF | EN 61326-1:2006, EN 61326-2-2:2006
ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489
V1.8.1:2008
FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249
FCCID : FCC: T68-FDMMBLE IC: 6627A-FDMMBLE |
| Safety compliance | ANSI/ISA 61010-1 / (82.02.01): 3rd edition
CAN/CSA-C22.2 No 61010-1-12: 3rd edition
UL 61010-1: 3rd edition
IEC/EN 61010-1:2010 |
| Certifications | CSA, FCC, CE |
| Ingress Protection (IP) rating | IP54 |
| Pollution Degree | 2 |
| Size (H x W x L) | 4.75 x 9.3 x 20.7 cm (1.87 x 3.68 x 8.14 in) |
| Weight | 340 g (12 oz) |
| Warranty | Three years |
| Not compatible with Fluke CNX test tools |
