Eliminate production mistakes
The Fluke 8808A 5.5 digit multimeter dependably performs the most
common measurements required by today’s applications. Whether you
are performing functional tests or making critical measurements on
test points, using the limit compare mode with pass/fail indicators
eliminates production mistakes, especially those where results are
“on the edge.” The 8808A display has built-in enunciators that
clearly show the operator whether a test passes or fails. The
pass/fail indicators take the guesswork out of testing: the result
is either within limits or it’s out!
Improve quality and efficiency in manufacturing test, R&D or
service applications
Manufacturing test, R&D, development and service applications
demand performance and flexibility from a bench meter. This Fluke
8808A makes measurements that stand up to any scrutiny. It delivers
a wide variety of measurement functions, including volts, ohms, and
amps, plus frequency—all at superior accuracy and resolution.
Measure two parameters at once
The 8808A features a unique dual display that allows you to measure
two different parameters of the same signal from one test
connection. Looking at dual interrelated parameters like voltage
and current simultaneously can reveal conditions that might go
unnoticed otherwise, greatly simplifying test and troubleshooting.
Measure sensitive leakage current
Typical multimeters use a shunt method to measure current, creating
a measurement burden voltage that increases the error in low
current measurements. This makes it difficult, if not impossible,
to perform tasks such as determining the true leakage current on a
battery-powered device while it is powered down, or measuring small
currents in sensitive circuits. The Fluke 8808A is the only
multimeter in its class to use a low-impedance operational
amplifier and current-to-voltage conversion technique to eliminate
the burden voltage and measure sensitive low currents. In this
special mode, the 8808A can accurately measure small currents with
a resolution of up to 100 nA.
Perform 4-wire measurements with only two leads
Patented split terminal jacks for the 2x4-wire ohms function allow
you to perform 4-wire measurements using only two leads instead of
four. Today’s surface mount components make it difficult to make
connections. The task becomes even more difficult when you need to
use a 4-wire technique for accurate low ohms measurements. The
Fluke test lead accessory combines the four wires into two test
lead pairs, making it easy for you to establish connections. You
get excellent resolution and accuracy, plus the convenience and
ease of using a single pair of leads.
FlukeView® Forms Basic
FlukeView Forms increases the power of your Fluke tool by enabling
you to document, store and analyze individual readings or series of
measurements, then convert them into professional looking
documents. Transfer data points from your meter to your PC and use
the standard, non-customizable forms to display your readings in
table or graphical form. For a larger array of forms or to use
FlukeView® Forms Designer customize your forms, upgrade to
FlukeView® Forms 3.0 with FVF-UG.
Fluke quality is built in
Fluke is known around the world for its rugged, reliable, and
accurate multimeters. With our experience, design standards and
quality assurance processes, we have designed a multimeter that
will stand up to any scrutiny of its specifications. In fact, a
Fluke meter typically performs better than specified. All of our
efforts are designed to ensure that you can make an accurate
measurement— repeatedly, and with confidence.
