| Fluke SMFT-1000 Multifunction PV Analyzer | | |
| | | |
| Protective conductor resistance (RLo) |
| Display range | Measuring range | Resolution | Accuracy |
| 0.00 Ω - 19.99 Ω | 0.20 Ω - 19.99 Ω | 0.01 Ω | ± (2 % + 2 Digit) |
| 20.0 Ω- 199.9 Ω | 20.0 Ω - 199.9 Ω | 0.1 Ω | ± (2 % + 2 Digit) |
| 200 Ω - 2000 Ω | 200 Ω - 2000 Ω | 1 Ω | ± (5 % + 2 Digit) |
| | | |
| Test current | ≥ 200 mA (≤ 2Ω + Rcomp) | | |
| Test voltage | 4 V DC … 10 V DC | | |
| Polarity reversing | Yes | | |
| Test lead zero (Rcomp) | Up to 3 Ω | | |
| | | |
| PV module/PV string, open-circuit voltage (Voc) |
| Display range | Measuring range | Resolution | Accuracy |
| 0.0 V - 99.9 V | 5.0 V - 99.9 V | 0.1 V | ± (0.5 % + 2 Digit) |
| 100 V - 1000 V | 100 V - 1000 V | 1 V | ± (0.5 % + 2 Digit) |
| | | |
| Polarity test | Yes | | |
| | | |
| PV module/PV string, short-circuit current (Is/c) |
| Display range | Measuring range | Resolution | Accuracy |
| 0.0 A - 20.0 A | 0.2 A - 20.0 A | 0.1 A | ± (1 % + 2 Digit) |
| | | |
| Insulation resistance (RINS) |
| Display range | Measuring range | Resolution | Accuracy |
| 0.00 MΩ - 99.99 MΩ | 0.20 MΩ - 99.99 MΩ | 0.01 MΩ | ± (5 % + 5 Digit) |
| 100.0 MΩ - 199.9 MΩ | 100.0 MΩ - 199.9 MΩ | 0.1 MΩ | ± (10 % + 5 Digit) |
| 200 MΩ - 999 MΩ | 200 MΩ - 999 MΩ | 1 MΩ | ± (20 % + 5 Digit) |
| | | |
| Measuring range | Resolution | Accuracy |
| Test voltage @ no load | 50 V / 100 V / 250 V up to 199.9 MΩ
500 V / 1000 V up to 999 MΩ | 1 V | 0 % to + 20 % |
| Test voltage @ ≥ 1 mA | 250 V @ 250 kΩ
500 V @ 500 kΩ
1000 V @ 1 MΩ | 1 V | 0 % to + 10 % |
| Testing current | Min. 1 mA (@ 250 kΩ / 500 kΩ / 1 MΩ)
Max. 1.5 mA (short circuit) | | |
| | | |
| Blocking diode checking (Vbd) |
| Display range | Measuring range | Resolution | Accuracy |
| 0.00 V DC - 6.00 V DC | 0.50 V DC - 6.00 V DC | 0.01 V DC | ± (5 % + 10 Digit) |
| | | |
| Surge protection device (SPD) |
| Display range | Measuring range | Resolution | Accuracy |
| 0 V DC - 1000 V DC | 50 V DC - 1000 V DC | 1 V DC | ± (10 % + 5 Digit) |
| | | |
| | | |
| AC/DC voltage measurement via 4 mm test sockets |
| Display range | Measuring range | Resolution | Accuracy |
| 0.0 V AC - 99.9 V AC | 5.0 V AC - 99.9 V AC | 0.1 V | ± (2.5 % + 2 Digit) |
| 100 V AC - 700 V AC | 100 V AC - 700 V AC | 1 V | ± (2.5 % + 2 Digit) |
| 0.0 V DC - 99.9 V DC | 5.0 V DC - 99.9 V DC | 0.1 V | ± (2.5 % + 2 Digit) |
| 100 V DC - 1000 V DC | 100 V DC - 1000 V DC | 1 V | ± (2.5 % + 2 Digit) |
| | | |
| Detection AC/DC | Yes (Automatic) | | |
| + / - polarity check | Yes | | |
| | | |
| AC/DC current with i100 clamp |
| Display range | Measuring range | Resolution | Accuracy (DC, AC 50 Hz/60 Hz) |
| 0.0 A DC – 100 A DC | 1.0 A DC – 100 A DC | 0.1 A | ± (5 % + 2 Digit) * |
| 0.0 A AC – 100 A AC TRMS | 1.0 A AC – 100 A AC TRMS | 0.1 A | ± (5 % + 2 Digit) * |
| * i100 clamp tolerances not inclusive | | | |
| | | |
| i100 Clamp Tolerances |
| Display range | Measuring range | Output signal | Accuracy (DC, AC 50 Hz/60 Hz) |
| N/A | 1 A - 100 A DC or AC < 1 kHz | 10 mV/A AC/DC | ± (1.5 % + 0.1 A) |
| | | |
| | | |
| AC/DC Power measurement (with i100 clamp) |
| Display range | Measuring range | Resolution | Accuracy (DC, AC 50 Hz/60 Hz) |
0.0 V AC - 700 V AC
0.0 V DC - 1000 V DC | 5.0 V AC - 700 V AC
5.0 V DC - 1000 V DC | 0.1 V | ± (2.5 % + 2 Digit) |
| 0 A AC/DC - 100 A AC/DC | 1 A AC/DC- 100 A AC/DC | 0.1 A | ± (6.5 % + 3 Digit) |
| 0 kW/kVA – 100 kW/kVA | 5 kW/kVA – 100 kW/kVA | 1 kW/kVA | ± (10 % + 4 Digit) |
| | | |
| | | |
| | | |
| General Specifications | | |
| SMFT-1000 size | 10 cm x 25.0 cm x 12.5 cm (3.8 in x 9.8 in x 4.9 in) | | |
| SMFT-1000 weight | 1.4 kg (3.09 lb) | | |
| Battery | 6 AA IEC LR6 | | |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) | | |
| Storage temperature | -30 °C to 60 °C (-22 °F to 140 °F) batteries removed | | |
| Operating altitude | up to 2000 m | | |
| Storage altitude | up to 2000 m | | |
| Safety | | |
| SMFT-1000 PV Analyzer | IEC 61010-1 Pollution Degree 2
IEC 61010-2-034 CAT III 1000 V dc, CAT III 700 V AC | | |
| i100 Current Clamp | IEC 61010-2-032, Type D (for insulated conductors), 1000 V | | |
| Accessories | IEC 61010-031 | | |
| TL1000-MC4 | CAT III 1500 V, 20 A | | |
| TP1000 Remote Probe (with cap) | CAT IV 600 V, CAT III 1000 V, 10 A | | |
| TP1000 Remote Probe (without cap) | CAT II 1000 V, 10 A | | |
| TL1000 Test Leads | CAT III 1000 V, 10 A | | |
| TL1000/30M Test Leads | CAT III 1000 V, CAT IV 600 V,
5 A (on reel) 10 A (fully extended) | | |
| TP74 Test Probes (with cap) | CAT III 1000 V, 10 A | | |
| TP74 Test Probes (without cap) | CAT II 1000 V, 10 A | | |
| AC285 Alligator Clip | CAT III 1000 V, 10 A | | |
| Performance | IEC 61557-1, IEC 61557-2, IEC 61557-4, IEC 61557-10 | | |
| Electromagnetic Compatibility (EMC) | | |
| International | IEC 61326-1: Portable Electromagnetic Environment, CISPR 11: Group
1, Class A
Group 1: Equipment has intentionally generated and/or uses
conductively-coupled radio frequency
energy that is necessary for the internal function of the equipment
itself.
Class A: Equipment is suitable for use in all establishments other
than domestic and those directly connected to a low-voltage power
supply network that supplies buildings used for domestic purposes.
There may be potential difficulties in ensuring electromagnetic
compatibility in other
environments due to conducted and radiated disturbances.
Caution: This equipment is not intended for use in residential
environments and may not provide
adequate protection to radio reception in such environments. | | |
| Wireless Radio Module | | |
| Frequency Range | 2.402 GHz to 2.480 GHz | | |
| Output Power | 8 dBm | | |
