Acidsilicone Sealant Transparent Weather Resistant Glue Anti Mildew Glue
Sealant Factory Information:
With 20 years of experience in glue production, the factory covers an area of 40,000 square meters
equipped with highly mechanized equipment. The daily output is 30,000 pieces and there are more than 200 production and
R & D personnel. The source factory supports OEM/ODM. The products are cost-effective. We look forward to your contact.
Factory pictures
Acetic Silicone Sealant for construction is o ne-component, acidic room temperature curing silicone sealant.
It has excellent sealing and bonding performance for glass and building doors and windows.
Great for:
*S ealing of indoor w indow s and doors
* Vinyl siding sealing, General Sealing and water proofing
*General construction, Vinyl, aluminum and metal siding, metal building and portable
*Housing applications, Glass glazing, Sealing & bonding on porous substrate.
| NO. | Product Name | High-level Acetic Silicone Sealant TB252 |
| 1 | Appearance | Paste |
| 2 | Odour | Weak acid |
| 3 | PH | 6.0～7.0 |
| 4 | Surface drying time | ≤1h |
| 5 | Sag (mm) | 0 |
| 6 | Tensile bond strength,Mpa(23℃) | 1.03 MPa |
| 7 | Extrudability (ml/min) | 240-246 |
| 8 | Elastic recovery rate(%) | ≥80 |
| 9 | Product Features | Whitening resistant Excellent adhesion Anti-corrosion Fast curing |
| 10 | Recommendations | 1.Window and door sealing, Vinyl siding sealing, General Sealing and water proofing 2.General construction, Vinyl, aluminum and metal siding, metal building and portable 3.Housing applications, Glass glazing, Sealing & bonding on porous substrate. |
| 11 | Usage | 1. For unknown materials, the adhesion test of silicone glue and adhered substrate must be done before use to confirm the applicability of the product
2. The bonding surface of the substrate must be thoroughly cleaned
with a solvent or a suitable cleaning agent to keep dry and to prevent pollution, and sizing within 30 minutes after cleaning; the suitable construction temperature is 6 ℃ ~ 40 ℃
3. Sizing must ensure that the gap is fully filled to make the adhesive
layer dense, closely contact the surface of the substrate, and trimmed before the colloid is not cured to ensure a smooth and beautiful appearance |
Usage Methods:
Preparation Work:
Ensure the construction surface is clean, dry, free of dust, grease and moisture. Clean it with a cleaner and a rag. Install the
glass glue gun in advance.
Gluing Steps:
Use a utility knife or scissors to cut the bottle mouth of the glass glue. Pay attention to make the incision of an appropriate size
to ensure smooth glue extrusion.Load the glass glue bottle into the glue gun and ensure a firm installation.Hold the glue gun,
align the glue nozzle with the construction area, and press the trigger of the glue gun at a constant speed to extrude the glass
glue evenly.
Construction Skills:
Keep the glue nozzle at a 45-degree angle to the construction surface when applying the glue, so that the glue can be
distributed more evenly on the construction surface.For longer construction joints, apply the glue in sections. After each
section, use your fingers or tools to compact and smooth the glue.
Post-treatment:
After applying the glue, promptly clean the excess glass glue with a damp cloth or scraper to avoid difficulty in cleaning after
curing.
Contact:
| WhatsApp | +86 13302391599 |
| Telephone | +86 13302391599 |
| Email | mangrove88@126.com |
FAQ
Q1. When can I receive my products?
A1: Sample order need 1 - 3 days.
Mass production need 7- 10 workdays.
Q2. Can you send me samples for reference?
A2: Yes, we are glad to send you free samples.
Q3. Can you provide OEM service?
A3: Yes, and we can custom the volume and tube package.
Q4: Where is your factory? Can I visit it?
A4:Our factory locate in Guangdong Province, welcome to visit us anytime!
Q5: What is the payment term that you can provide?
A5: Sample 100% payment.
30% TT prepayment and 70% balance payment for mass order.
