DFWK-102K Type Switchgear Cabinet Electric Enclosure Customized
High Voltage
Product Description:
The inner layer is used to equalize the internal electric field and
the outer shield layer is used to protect the cable head from zero
potential. The inner layer of the lower end of the stress cone is
in close contact with the semiconductor layer of the cable, while
the outer semiconductor layer is in close contact with the outer
semiconductor layer of the cable head and is grounded through the
earthing hole of the cable head. This not only solves the problem
of electric field concentration in the cut off of the outer shield
layer of the cable, but also keeps zero potential in the outer
shield layer of the cable to ensure personal safety.
The front connector of the touchable cable is directly installed on
the casing of the equipment, and then it can be connected with the
rear connector of the touchable cable to form a multiway outlet
line or to connect with the arrester to provide overvoltage
protection for the power network.
Product Advantage:
●Prefabricated live touchable silicone rubber cable head, fully
sealed, fully insulated, maintenance-free and reliable for personal
safety;
●Compact structure, compact appearance, stainless steel bilayer
box, service life can reach more than 20 years;
●On the premise of not affecting the operation of the main network,
the regional blackout maintenance is realized and the blackout
range is reduced;
●Can be equipped with one or more sf6 load switches, flexible
wiring mode, branch outline up to 8 circuits;
●Optional arresters, short-circuit fault indicators,
current-limiting fuses and so on, to meet various user
requirements.
Technical Paramenters:
| No. | Name | Parameter |
| 1 | Rated voltage | 12kV |
| 2 | Rated current | 630A |
| 3 | Power frequency voltage resistance (phase) | 42kV/min |
| 4 | Lightning impulse voltage | 75kV |
| 5 | Rated on-off current | 630A |
| 6 | Rated short circuit switching current (peak value) | 50KA |
| 7 | Rated short-time tolerant current | 25kA/4S |
| 8 | Rated peak tolerant current | 50KA |
| 9 | Rated on-off capacitance current | 45A |
| 10 | Rated on-off inductive current | 16A |
| 11 | Full load breaking times | >100 |
| 12 | Switching machine operation times | 2000 |
Technical Requirement:
●The inside of brick wall uses 1:3 cement mortar to wipe seal, and
do waterproof treatment;
●The beam is operated by φ 6 concrete;
●The base channel steel must do anticorrosive treatment after
making;
●After the installation of the branch box, the base is covered with
cement;
●Waterproof measures to be taken at the entrance to the hole;
●The ground electrode should be embedded in the foundation, and the
grounding resistance meets the requirements of the power
department.
FAQ:
Q: How can i get the price?
A: We usually quote within 24 hours after we get your
inquiry(Except weekend and holidays). If you are very urgent to get
the price, please email us or contact us in other ways so that we
can offer you a quote.
Q:How could I get a sample?
A:Before we received the first order, please afford the sample cost
and express fee. We will return the sample cost back to you within
your first order.
Q:How to guarantee the quality of your products?
A:1) Strict detection during production.
2) Strict sampling inspection on products before shipment and
intact product packaging ensured.
