Rebar Planting Epoxy Chemical Anchor Adhesive for Building Reinforcement

Rebar Planting Epoxy Chemical Anchor Adhesive for Building Reinforcement

Rebar Planting Epoxy Chemical Anchor Adhesive Is Used Building Reinforcement

Factory Information:

With 20 years of experience in adhesive production, the factory covers an area of 40,000 square meters, equipped with highly

mechanized facilities. The daily output reaches 30,000 pieces, and there are over 200 production and R&D personnel. We are

an original factory supporting OEM/ODM. Our products are cost-effective. Looking forward to your contact.

Epoxy chemical anchor is a chemical anchoring agent, also known as epoxy resin anchoring agent. It is commonly used to

secure and support structures, such as steel bars and bolts, to ensure that they can withstand the required weight and

pressure. This chemical anchoring agent is made by mixing epoxy resin and curing agent, once mixed together, they form a

strong chemical bond, which secures the steel bars or bolts in concrete or other substrates. This chemical anchoring agent has

the advantages of high strength, corrosion resistance and heat resistance, and is widely used in construction, bridges, tunnels

and other infrastructure projects.

Usage Method:

• Drilling - Drill holes at the positions where rebar is to be implanted according to the design requirements using an
• electric drill.
• Hole cleaning - Use a brush or blower to remove dust and debris from the holes, then wipe the hole walls with
• or alcohol to ensure the holes are clean and dry.
• Rebar treatment - Use a wire brush to remove rust and oil stains from the rebar surface, and wipe it clean with
• or alcohol.
• Glue-mixing - Mix the glue liquids of components A and B in accordance with the proportion specified in the rebar-
• planting glue product manual, and stir evenly.
• Glue injection - Inject the well-stirred rebar-planting glue into the holes using a glue injector or syringe. Generally,
• the glue injection volume should reach about 2/3 of the hole depth.
• Implant rebar - Insert the treated rebar quickly into the hole, rotate the rebar in a certain direction to evenly distribute
• the glue liquid and expel the air from the hole.
• Curing and maintenance - According to the curing time of the rebar-planting glue, avoid disturbing the rebar during
• the curing period. Under normal temperature, it usually takes several hours to several days to fully cure.

Contact:

Factory Pictures

Guangzhou Mangrove Rubber Industry Co., Ltd.