Resolution 1400×1050,Maximum brightness 30000cd/m2,Display Color Single green,Lightweight 0.71 inch Silicon Micro OLED Microdisplay with High Definition for VR AR and Drones

0.71 inch silicon based Micro OLED Microdisplay

A 1920(RGB) 1080 dots 0.71 inch silicon based Micro OLED Microdisplay is given .It is built with single crystal silicon transistors. In order to achieve small size, light weight, and excellent definition, this panel combines a panel driver with a logic driver.

Product Description

The 0.71-inch Micro OLED Microdisplay, which is silicon-based, can show pictures and videos taken by infrared cameras and other IR imaging equipment. Users can perceive the infrared spectrum and observe items that are not visible to the human eye in low light thanks to its optimization for presenting IR photos.In addition to others, it has uses in the domains of security, military, medicine, industry, and aerial photography.

Parameters of 0.71 inch silicon based Micro OLED Microdisplay

Specifications of 0.71 inch silicon based Micro OLED Microdisplay

● Active Pixels: 1920×1080(FHD)

● I²C +MIPI(2/3/4lanes)

● Up to 90Hz frame rate

● Color space conversion,Contrast and brightness adjustment

● Built-in OTP for gamma correction,Support temperature compensation for VCOM with internal temperature sensor

● Applications: A variety of miniaturized, high PPI, low power consumption and wide operating temperature range of near-eye display system

ABOUT US

FOVA Technology (Shenzhen) Co.,Ltd. was founded in 2020,the factory is located in Shenzhen,China,the company's core R & D team and technology from China Aerospace Science and Technology Group , the team technical members engaged in related product development more than 4 years of work experience,Led the development of inertial turntable test system,strapdown inertial system,undertake various industries of non-standard test instruments and equipment pre- research,design and production tasks, for navigation, aerospace, aviation , electronics , weapons and other fields of scientific research institutes , colleges and industrial and mining enterprises to provide a large number of high-quality products and services.

FOVA Technology (Shenzhen) Co.,Ltd. has been committed to the design and manufacture of various professional technologies related to the inertial test turntable for many years . Especially in the structural design and manufacturing ,Angle measurement and positioning , speed control , simulation technology and manufacturing technology and other related research has accumulated rich experience and formed the necessary basic conditions in the design , manufacturing , testing process and a high-level professional team , is the most research and development and production of various types of turntable equipment complete capacity manufacturers. At present, it has the ability to develop and produce more than 130 sets (sets) per year. The company has more than 50 professional and technical personnel, mainly engaged in the research and development , design , commissioning and after-sales service of the turntable , the company specializes in supporting professional after-sales installation , commissioning , training services of engineering and technical personnel , so that rapid response , serious and responsible , service in place.

After years of precipitation and efforts in the inertial technology innovation and development , the company has inherited several generations of inertial test bench theoretical technology inheritance , and on the basis of the original technology to develop a new generation of inertial test bench development of the core key technology, has fully independent core technology of inertial platform test system , test simulation equipment and other high-tech series of products . The inertial platform system and inertial strapdown system developed and produced and the corresponding special test equipment have been successfully applied to a variety of strategic and tactical missiles , ship-borne , missile-borne and other key types of tasks .