Most Popular ChangAn CS5 Rear Trunk Power Tailgate With Button Switch Key Fob Open

Technical Parameters:

1. Intelligent Induction: Anti-pinch force setting / Anti-collision force setting. (When the system detects the intention of the car owner of manually open and close the door, power liftgate system will be in the auxiliary state automatically.
2. Intelligent Speed Control: Through intelligent control such as slow start and decelaration, it can ensure that the tailgate runs smoothly and impact of the system is slowed down. At the same time, the lift of the motor is prolonged.
3. Abnormal Scene Processing: Double pole load balancing. When a pole fails, the door can be prevented from being deformed. When the tailgate fails in a special scene, the system will automatically adjust the closing effort.
4. Fault Detection: When the drive circuit is faulty (low-voltage alarm, over-current protection), it will automatically cut off / automatically recover to ensure the safety of vehicles and equipment.
5. Ultimate Energy Saving: Ultra-low quiescent current (Standby Current: 1 mA). It can avoid that the vehicle can not start without power due to long-term parking.

How to Use a Power Liftgate

Using a power liftgate is straightforward and convenient. Here’s a step-by-step guide on how to operate it effectively:

1. Using the Key Fob

• Open the Liftgate:

  • Press the designated button on your key fob that features the liftgate icon. This will automatically unlock and open the liftgate.

• Close the Liftgate:

  • Press the same button again to close the liftgate, or use the button located inside the vehicle if available.

2. Using the Interior Controls

• Open the Liftgate:

  • Locate the liftgate button on the dashboard or center console and press it to open the trunk.

• Close the Liftgate:

  • Press the same button again to close the liftgate.

3. Using the Liftgate Itself

• Open the Liftgate:

  • If your liftgate has a button on the liftgate itself, press it to open. This is usually located near the center or on the left side.

• Close the Liftgate:

  • To close, press the button on the liftgate again or push the liftgate down manually if needed.

4. Hands-Free Operation

• Open the Liftgate:

  • With your hands full, approach the rear of the vehicle and kick your foot under the rear bumper (if equipped with a hands-free feature). The liftgate should automatically open.

• Close the Liftgate:

  • To close, either press the button on the liftgate or use the key fob as mentioned earlier.

5. Adjusting Opening Height (if applicable)

• Set the Height:

  • Open the liftgate to the desired height, then press and hold the height adjustment button (usually found on the liftgate or inside the vehicle) until you hear a beep. This sets the new height.

• Resetting the Height:

  • To reset, repeat the process and set a new height as desired.

Safety Tips

• Check for Obstructions: Always ensure the area around the liftgate is clear before operating to avoid accidents.

• Obstruction Sensors: If the liftgate encounters resistance while closing, it should automatically stop and reverse. If this doesn’t happen, check the sensors for any blockages.

• Manual Override: In case of a malfunction, most power liftgates can be operated manually. Consult your vehicle’s owner manual for instructions.

Conclusion

Using a power liftgate enhances convenience when accessing your vehicle's cargo area. Familiarize yourself with the specific controls and features of your liftgate model to maximize its functionality. Enjoy the ease and accessibility it provides!

FAQ:

Q1. What are your terms of packing?

A: Generally, we pack our goods in carton box, suitable for shipping container.

Q2. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. How about your delivery time?

A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q4. Can you produce according to the samples?

A: Yes, we can produce by your parameters.

Q5. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the sample fee is required.

Company Profile

Founded in 2009, the company is committed to the development and production of intelligent in-vehicle infotainment systems. With the “automobile intelligent system” as its core product, it provides intelligent vehicle solutions for OEM customers. Our company has independent software and hardware R&D teams, all the core technology is all self-control, and has independent production capacity, but also has a very perfect after-sales service team. Providing excellenct products and comprehensive service for car factory.

The headquarters of the company is located in Zhonghaixin Science and Technology Park, Longgang District, Shenzhen. The new manufacturing base in Fenggang Town, Dongguan City is more than 50000 square meters. It was officially used on September 1, 2017. It has the most advanced production line in the industry and the annual production capacity is expanded to 2 million units.

The company’s product sales and service network covers 35 provinces and cities across the country. The company is firmly committed to scientific and technological innovation, concentrating on product technology research and development, focusing on product quality and integrity services. We have a large number of outstanding talents in the field of professional technology. R&D personnel have a wealth of theoretical knowledge and research and development experience, making a breakthrough in research and development.