SS 304 Sewage Treatment Plant Hot Heat Low Temperature Belt Sludge
Dry Equipment Sludge Drying Machine Thermal Dryer
| Name | Low temperature sludge drying machine |
| Model | YJWN6000SL |
| Standard Water Removal Capacity | 6000kg/24h |
| Dehydration capacity | 250kg/h |
| Installed Power | 75kW |
| Heat Pump Module Count | 2 Unit |
| Number of Compressor Units | 8 Unit |
| Cooling Method | Air Cooled (FL)/ WaterCooled(SL) |
| Cooling Water amount (with a temperature difference of 10°C) | 6.8m³/h |
| Stainless steel mesh chain | three layers /two layers |
| Refrigerant | R134a/R22 |
| Power Supply | 380V/3N /50Hz |
| Drying Temperature | 35℃~56 ℃(return air) / 60℃~80 ℃(supply air) |
| Control System | Touch Screen HMI + PLC Controller |
| Moisture content range | Moisture content (40%~80%) (Customized) |
| Dry material moisture content | 10%-50% |
| Dimensions | 8060mm×2260mm×2700mm |
| Net Weight of Equipment | 6300kg |
| Operating Weight | 7800kg |
| Molding method | Slicing/Pelletizing |
| Structural form | Assembly |
Operating Principle of Sludge Drying Equipments
Step 1: The wet sludge(moisture content 60%-80%) will be
crushed,cut and squeezed into strips before entering into the
sludge drying machine.
Step 2: The wet low-temperature circulating air passing into the
heat pump through the circulating fan and enter the heat exchanger;
Step 3: The low temperature air after cooling comes out from the
heat exchanger,and exchange heat energy with the evaporator to
reduce the temperature; It becomes condensate water when the
temperature drops to below the dew point.
Step 4: Evaporated air from the intermediate cooler exchange heat
energy with the heat pump; And enters the condenser after the
airout temperature is increased.
Step 5: The circulating air becomes hot and dry after passing
through condenser before entering the sludge drying machine,
Step 6: The wet sludge and the hot dry air in the drying equipment
are continuously circulated and turn into about dried sludge with the moisture content of 10%-30%.
Sludge dryer Thermal
Advantages of Yanjiang Low Temperature Sludge Drying Equipemt
The moisture content of sludge can drop from 80% to 10%-30% after
drying process,and the reduction can be as high as 80%. The
effective sterilization can be as high as 90%, with low energy
consumption and no pollution.
High Automation
Continuous automatic operation of sludge drying is achieved due to
the design of the equipment. The sludge drying process avoids the
investment of manpower and reduces costs.
Energy saving and eco-friendly,no secondary pollution
The entire equipment system adopts a closed design and heat
recovery technology; No heat loss, 100% heat utilization; The
moisture is finally discharged in the form of condensate water and
the air is recycled; There is no secondary pollution problem of
exhaust gas emissions.
Low energy consumption
The low-temperature heat pump drying equipment can dry wet sludge
with a moisture content of 80% per ton to 30%, and the operating
cost is as low as 13.5kw/h.
Low drying temperature,less safety risks
The drying temperature is lower than 70ºC, there are few problems
such as explosion and toxicity of the sludge that may volatilize;
Stable operation and high utilization rate.
Application
Company Information:
Henan Yanjiang Environmental Technology Co., Ltd. as a professional
integrated environmental service provider, Committed to the
continuous improvement of traditional business and the development
of forward-looking business, for the global cities, towns and
enterprises, to provide environmental and development of the
overall solution and long-term stewardship service, in the field of
environmental pollution control and facility operation, sewage
treatment, seawater desalination, water purification equipment and
water reuse, organic waste comprehensive utilization and biomass
energy development and utilization, the environment Business
activities are carried out in the fields of restoration,
environmental safety management, environmental advisory services
and environmental investment and financing management.
FAQ:
Q1:Are you trading company or manufacturer?
A:We are factory.
Q2:How long is your delivery time?
A:Generally it is 15~20 days. Specific time depends on your ordel
volume.
Q3:Can l get your products with our logo and design?
A:Customized service is available. We provide OEM or ODM by
customer's logo
Q4: Do you accept sample order?
A: Yes,we can make your customized sample before mass order placed.
Q5: How about the quality of your products?
A:We have many years of experience in construction machinery
manufacturing. All machines are
Manufactured in strict accordance with national and international
standards, each equipment is tested before leaving the factory.
