Spiral ABS Nozzle For Marley Cross Flow Cooling Tower
The counterflow sprayer is an injection molded ABS spiral target
nozzle, assembled by two parts-the main body and orifice cap. It is
used in the crossflow cooling tower.
The uniform water distribution is the main factor for maintaining
cooling tower efficiency. Latino's spiral target spray nozzles
ensure hot water distribute uniformly to the fill blocks. This
nozzle are high-temperature resistant and non-clogging designed.
Material: ABS
Method of assembly: Rubber clamping
This Crossflow Spiral ABS Nozzle For Cooling Tower is available in
13mm, 17mm, 26mm and 19mm This amount of flexibility allows for a
wide raCrossflow Spiral ABS Nozzle For Cooling Tower nge of
adjustment in water flow rates and basin water levels.
The Spiral Target cooling tower nozzle is available in three
lengths. The 2.625 nozzle is used on wood, steel, and fiberglass
cooling towers where basin support structure does not obstruct the
release of water. The 4.875 nozzle is used on larger industrial
wood and concrete cooling towers and on applications where clogging
might be a concern. The 6.875 nozzle is used on towers where the
release of the water has to clear obstructions within the tower
structure.
In every application the crossflow cooling tower nozzle should be
located at the correct distance above the top of the cooling tower
fill to obtain maximum water distribution over the fill area.
Characteristics For Crossflow Cooling Tower Nozzle
1. Low water pressure, non-clogging design
2. High efficiency
3. Maintenance-free
4. Uniformly distribution of water
