ISO Dust Chamber Testing equipment With Stability Test in blue and
white color
The Sand Dust Testing equipment is suitable for detecting the
sealing performance of the product's shell,mainly to
simulate the damage caused by the sandstorm weather to
locks,automobile and motorcycle parts,seals,power meters
and other products.
Products Features:
• Accept customized design requirements.
• Properties and applications meet the military and industry
standards.
• 7'' touch screen display and intelligent software for easy and
comfortable operation.
• Advanced rotary blowing design to prevent dust from backflflow.
• Automatic control the amount of dust/sand and wind to meet the
standards of tests.
• Dynamic adjustment temperature control system: rapid and stable
control of test chambers' temperature.
• Intelligent function: automatically add and recycle sand/dust.
• Independent control of temperature and humidity ensures a stable
testing.
• Fashionable design of modular construction.
• Observation window in testing space with a dust wiper for
real-time monitoring.
• Intelligent and independent protection design for overload,
overheat, power supply abnormity, overvoltage,
component malfunction monitoring.
Specifications:
| Model:Testing equipment | ESC500 | ESC800 | ESC1000 | ESC1500 |
| Sample holder Dimension (mm) | 785×785 | 790×990 | 980×980 | 980×1480 |
| Test Space Dimension (mm) | 800×800×800 | 800×1000×1000 | 1000×1000×1000 | 1000×1500×1000 |
| Temp. Range (C°) | RT +20~+80 adjustable |
Selective Dustproof | IP5X (Dustproof Test, increase or no negative pressure) IP6X (Seal Test, increase negative pressure) |
| Standards | IEC60529:2001 |
| Power | AC230V ±10%, 50HZ, 3/N/PE |
| Temp. Range (℃) | RT+20 ~ +80 Adjustable |
| Humid. Range (%RH) | 10~30 |
| Blowing methods | Up and Down, Gyratory Cycle |
| Time control | 0~99h59m59s, adjustable |
| Dust Blowing Test | GJB-150.12-2009 |
| Dust Concentration (g/m³ ) | 10.6±7 |
| Speed of Dust Blowing (m/s) | 1.5~8.9 |
| Dust Composition | 97%~99% SiO2 |
| Sand Blowing Test | GJB-150.12-2009 |
| Sand Concentration (g/m³) | 2.2g±0.5; 1.1g±0.3; 0.18 |
| Speed of Sand Blowing (m/s) | 18~30 |
| Sand Diameter (um) | 150~850 |
| Dust-Falling Test | GJB-150.12-2009 |
| Dust-Falling Concentration (g/m³ ) | 0.1~10.6±7 |
| Dust Particle Diameter (um) | 20~150 |
| External Dimension (mm) | 1300W×1300D×1300H |
| Power | AC230V±10%, 50HZ, 1/N/PE |
| Options Accessories: | Standard Version: |
Independent sensors for protection (NE60519-2.1993) | 1 Stainless steel shelve |
| Entry ports for testing space | 1 Screen sieve |
| Power outlets for specimens | |
| Spare parts package | |
| E-management and cyber-software | |
| APP for mobility management | |
| Sand testing medium | |
| Dust testing medium | |
Structural mode:
The testing equipment adopts an integral structure with the working
chamber as the main body. On the right
side of the test box, an electronic control cabinet is set up, and
an electronic control device and an operation
panel device are built in. The back and bottom of the test box are
equipped with an electromechanical cabin,
four sets of internal circulating fans and four sets of sand and
dust vibrators. Installation of vacuum interface
device, sand heater, sample shelf, top-down circulating air inlet
and outlet, double-door design for studio,
observation window on door, etc.
The dust circulation mode of the equipment can enter from the
bottom of the equipment, and then from
both sides of the equipment into the inner box, which meets the
IEC60068-2-68 dust test method. The
following is a schematic diagram of the standard.
The bilateral view of the equipment is shown in the following
figure. The controller is located on the right
side of the equipment. There are two air outlet pipes under the
rules behind it.
