Wet pan mill for gold mining with 300 400 kg per hour capacity in
Africa
Wet pan mill is also called gold grinding mill machine. It is used
for grinding gold ore, especially small rock stone with gold, which
can grind into 100-150 mesh. Many customers from Africa would like
to import wet pan mill because of low cost and high productivity.
The most common way is to put mercury in the wet pan mill, and mix
the gold particle with the mercury, which is called Amalgamation.
Then the mixture of gold and mercury can be put into crucible for
high temperature heating. During this process, the mercury is
evaporated and pure gold is left in the crucible.The most important
thing is that our customers can get pure gold directly after wet
pan mill, which is suitable for people who want to begin small
business.
Product picture
Working principle
Wet pan mill mainly through the raw material stirring, rolling,
crushing, rolling repeatedly to achieve water balance, uniform
ratio, low gas content, improve the molding rate and molding
quality, through the machine grinding material molding products,
with high density, good strength, no porosity ratio and other
characteristics. High efficiency and energy saving, high output,
the product is used for the recovery of tailings in the iron ore
process, does not make the loss of mineral powder, so that
effective resources can be fully utilized.
Main Features of Wet Pan Mill
1. Less investment.
2. Easy to operation and maintenance.
3. High efficiency and saving power.
4. It can take the place of ball mill because all the materials
that ball mill can handle, the wet mill machine can handle as well.
5. The Best price river gold widely used Sudan wet pan mill for
gold is the ideal equipment for small and medium enterprises that
are in the field of ore dressing.
6. The wet pan mill machine made by ASCEND, can offer the seal
cover to reduce the air pollution.
Specification
| Model | Type
(mm) | Max feed
size (mm) | Capacity(t/h) | Power(kw) | Weight(ton) |
| 1600 | 1600x350x200x460 | ＜25 | 1-2 | Y6L-30 | 13.5 |
| 1500 | 1500x300x150x420 | ＜25 | 0.8-1.5 | Y6L-22 | 11.3 |
| 1400 | 1400x260x150x350 | ＜25 | 0.5-0.8 | Y6L-18.5 | 8.5 |
| 1200 | 1200x180x120x250 | ＜25 | 0.25-0.5 | Y6L-7.5 | 5.5 |
| 1100 | 1100x160x120x250 | ＜25 | 0.15-0.25 | Y6L-5.5 | 4.5 |
| 1000 | 1000x180x120x250 | ＜25 | 0.15-0.2 | Y6L-5.5 | 4.3 |
Wet pan mill maintenance method
1. Bearing the full load of the machine, so good lubrication has a
great relationship to the bearing life, it directly affects the
service life and operation efficiency of the machine, so the
injection of lubricating oil must be clean, the seal must be good,
the main lubrication of the machine: rotating bearings, roll
bearings, all gears, active bearings, sliding plane.
2. The newly installed tire is easy to loose and must be checked
frequently.
3. Pay attention to the work of each part of the machine is normal.
4. Pay attention to check the wear degree of easily worn parts, and
pay attention to replacing worn parts at any time.
5. The bottom plane of the moving device, dust and other things
should be removed so that the machine meets the material that can
not be broken when the moving bearing can not move on the bottom
frame, resulting in serious accidents.
6. Bearing oil temperature rise, should immediately stop to check
the cause to be eliminated.
7. If there is impact sound when the rotating gear is running, it
should be stopped immediately for inspection and eliminated.
Spare Parts
Working site
We also supply
Contact us
