Stainless Steel Half Height Two Arm Turnstile for Secure and Entry
Management
Two Arm Turnstile <IM.E.122> Product Specifications |
| Product Parameters | Dimensions: | Length 1200*Width 250*Height 1000mm | Box Material: | Box: 1.5mm SUS304 Stainless Steel |
| Arm Material: | SUS304 stainless steel | Channel Width: | 550~600 mm |
| Technical Parameter | ◆Material of the enclosure: Brushed stainless steel SUS304;
◆Service life: Over 15 million times of continuous operation;
◆Input voltage: AC220V±10V, 50Hz~60Hz;
◆Communication interface: RS232 serial port;
◆Driving motor: DC brushless motor (24~36VDC);
◆Operating environment temperature: -35°C~75°C;
◆Relative humidity: 0~90% (no condensation);
◆Passage speed: 30~50 people per minute (can open in memory mode);
◆Passage time: Card access passage time: 10S (if no one passes
within 10S, the gate will automatically close. The time can be
adjusted as needed). |
| Function Parameter | Basic Function | ●Passage Indication Function: LED indicator boards are installed
prominently on the outer frame of the gate to indicate the passage
status and direction to pedestrians. |
| ●Intelligent linkage alarm: including sound and light alarms such
as illegal intrusion and reverse traffic, which can be linked with
other alarm monitoring equipment |
| ●Anti-interference: It can limit the abnormality of the gate caused
by external factors such as electromagnetic |
| ●Passage mode setting: One-way pass, two-way pass, free pass, etc.
can be set through the buttons on the main control board |
| ●Anti-trailing: prevent the non-permissible situation of too many
people at one time. |
| ●Anti-pinch function: When the gate is in the process of closing,
the gate will stop closing after detecting the anti-pinch signal |
| ●Auto reset: After the gate is opened, if there is no passage
within the specified time, the system will automatically cancel the
user's access authority; the default is 10 seconds, and the passage
time can be set by the switch |
| ●Access control: The external port can connect a variety of
biometric devices |
| ●Power off and switch off: switch off after power off, and can set
the switch opening direction |
| ●Fault detection: The control board can support fault type
detection, assist in analyzing the cause of the fault, and handle
abnormal faults. |
| ●Traffic indication: There is a traffic status indicator; and an
alarm function for exceeding the stay time in the channel can be
set |
|
| Expanding Function | ▲Passing mode
△Normal: Normal passing mode
△ Passing: automatic car/electric car/motorcycle passing mode |
| ▲Open/close delay, set the delay opening time after the gate
receives the opening signal/set the delay closing time after
pedestrians pass, the default is 0 seconds |
▲ Swipe the card in the channel
△ Disabled by default: card swiping in the channel (induction
infrared area) is invalid
△Allow: Card verification is allowed in the channel. |
▲Whether the trailing and reversing are blocked by closing the door
△Do not close the gate: the reverse/trailing (A swipe card, B pass)
will not close the gate
△Close the gate first and then open the gate: close the gate first
for reverse/trailing traffic, and then open the gate again after
closing
△Do not open the gate after closing the gate: the reverse/trailing
traffic will close the gate, and the gate will not be opened again
after closing |
▲Fire linkage
△Normally open mode: the gate remains open;
△ Normally closed mode: the gate remains closed |
▲System language function
△Chinese: The system can set the Chinese interface
△English: The system can set the English interface |
▲Passage Mode
△Bidirectional passage,swiping card bi-directionally for people
flow.
△Bidirectional free passage, no credit card verification is
required.
△Single directional passage, Single directional (A) swiping card,
and the gate opens normally for people flow; reverse directional
(B) swiping card is invalid, and the gate closes.
△Single directional free passage, Single directional (A) free
passage, and reverse directional passing (B) require a swiping card
verification.
△Passing is prohibited, Bidirectional swiping card is invaild, and
the gate enters the locked state.
△Passing is prohibited,Bidirectional card swiping is invalid, and
the speed gate turnstile enters the locked state |
|
Product Application
Entry management turnstiles are physical barriers commonly used in
various facilities, such as office buildings, stadiums, airports,
and train stations, to control the flow of people entering or
exiting a restricted area. These turnstiles are designed to ensure
security, prevent unauthorized access, and manage the movement of
individuals.
Entry management turnstiles typically consist of rotating arms or
gates that allow only one person to pass through at a time. They
are equipped with sensors and access control systems, such as RFID
card readers, barcode scanners, or biometric devices, to verify the
identity and authorization of individuals.
The main purpose of entry management turnstiles is to enhance
security by effectively monitoring and controlling the entry and
exit points. They help prevent tailgating (when multiple people try
to pass through with a single authorization), deter unauthorized
access, and provide an accurate count of the number of people
entering or leaving a facility.
These turnstiles can be integrated with other security systems,
such as CCTV cameras and alarm systems, to provide a comprehensive
security solution. They also offer features like anti-passback
(preventing someone from using the same access card multiple times)
and time-based access control.
In addition to security benefits, entry management turnstiles also
contribute to crowd management and efficiency. By regulating the
flow of people, they help prevent overcrowding and ensure a smooth
and organized entry process.
Overall, entry management turnstiles play a crucial role in
maintaining security, controlling access, and managing the movement
of individuals in various public and private facilities.
