10G L2 L3 managed fiber switch with 8 port PoE
Basic Features of Industrial Managed Switch
- 8x 10/100/1000Base-T RJ-45 and
- 4x 100M/1G/2.5G/10GBase-FX SFP Fiber, one console port
- Support IEEE 802.3af/at power on to 1 ~ 8 RJ45 ports
- 6 KV Ethernet surge protection, adapt to a harsh outdoor
environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- A store-and-forward switching mechanism
- Operating environment temperature: -40℃~75℃
Specification of 8 Port PoE Switch
| Product Name | 10G Managed Industrial POE Fiber Switch (4F+8TP) |
| Model No. | IM-FP4X88GW |
| Port | 4x 10GBase-FX SFP+ Fiber SM: 1310nm/1550nm, 20Km ;1490nm/1550nm, 40~120Km MM: 1310nm, 2Km 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3: 10Base-T 10Mbit/s Ethernet IEEE 802.3u: 100Base-TX, Fast Ethernet IEEE 802.3z: 1000Base-T Gbit/s Ethernet over fiber optic IEEE 802.3ae for 10 Gigabit Ethernet IEEE 802.1d: STP (Spanning Tree Protocol) IEEE 802.1s: 100Base-TX, Fast Ethernet IEEE 802.1w: RSTP (Rapid Spanning Tree Protocol ) ITU-T G.8032 :ERPS (Ethernet Ring Protection Switching) IEEE 802.1Q: Virtual LANs (VLAN) IEEE 802.1X: Port based and MAC based Network, Access
Control,Authentication IEEE 802.3ad: Link aggregation for parallel links with LACP(Link
Aggregation Control Protocol) IEEE 802.3x: Flow control for Full Duplex IEEE 802.1ad: Stacked VLANs IEEE 802.1p: LAN Layer 2 QoS/CoS Protocol for Traffic
Prioritization IEEE 802.1ab: Link Layer Discovery Protocol (LLDP) IEEE 802.1az: EEE (Energy Efficient Ethernet) IEEE802.3af: 15.4W IEEE802.3at: 30W |
| VLAND ID | 4094 IEEE802.1Q VLAN VID |
| Switch Architecture | System bandwidth:176Gbps (non-traffic jam) DRAM size: 4GB Switching delay: <10us Packet buffer :12Mbit Throughput: 95.23Mpps Jumbo frame :12KB MAC function :16K L2 |
| Data Processing | Store and Forward |
| Flow Control | IEEE 802.3x for full duplex mode Back pressure for half duplex mode |
Network Connector | 8x 10/100/1000Base-TX RJ-45 Auto MDI/MDI-X function |
| Console | RJ-45 port |
| Network Cable | UTP/STP above Cat. 5e cable |
| Protocols | CSMA/CD |
Reverse Polarity Overload Current Protection | Supported Supported |
| CPU Watch Dog | Supported |
| Power Supply | Redundant DC48V (12~52VDC) power (Removable Terminal Block ) |
Power Consumption | 8W(no-load) 18W (Full-load) |
| LED | Per unit: Power 1 (Red), SYS (Red), Reset(green) RJ-45 port: Link/Active (Green) Speed(Yellow) SFP Fiber port: Link/Active (Green) Extension indicator |
| Operating Temperature | -40 ~ 75°C |
| Operating Humidity | 0% to 95% (Non-condensing) |
| Storage Temperature | -40 ~ 85°C |
| Dimensions | 165 x 112 x 54mm |
| Weight | 0.85kg |
| Installation Mounting | Din-rail mounting |
| Certification | CE-EMC:EN 55032:2015+AC:2016+A1:2020+A11:2020 EN 55035:2017+A11:2020/EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013/A2:2021/AC:2022 CE-LVD: EN IEC 62368-1:2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B (Class B)ANSI C63.4:2014 |
| Software Specifications |
| Topology |
| VLAN | IEEE 802.1q VLAN,up to 4094 802.1Q VLAN VID IEEE 802.1q VLAN,up to 4094 Groups IEEE 802.1ad MAC-based VLAN,up to 256 entries IP Subnet-based VLAN, up to 128 entries Protocol-based VLAN(Ethernet, SNAP, LLC), up to 128 entries VLAN Translation, up to 256 entries GVRP (GARP VLAN Registration Protocal) MVR ( Multicast VLAN Registration) |
Link Aggregation (Port Trunk) | Static (Hash with SA, DA, IP, TCP/UDP port), up to 5 trunk group Dynamic (IEEE 802.3ad LACP), up to 5 trunk group |
| Spanning Tree | IEEE802.1d STP IEEE802.1w RSTP IEEE802.1s MSTP |
POE/POE+
| IEEE802.3at 30W IEEE802.3af 15.4W |
| Loop Protection | Supported |
ITU-T G.8032 Y.1344 ERPS (Ethernet Ring Protection) | Recovery time <50ms Single Ring, Sub-Ring, Multiple ring topology network |
| QoS Features |
| Class of Service | IEEE802.1p 8 active priorities queues for per port |
| Traffic Classification QoS | IEEE802.1p based CoS IP Precedence based CoS IP DSCP based CoS |
| Traffic Classification QoS | QCL(QoS Control List): Frame Type, Source/ Destination MAC, VLAN ID, PCP, DEI QCE(QoS Control Entry): Protocol, Source IP, IP Fragment, DSCP, TCP/UDP port number |
| DiffServ (RF 2474) Remarking |
| Storm Control | for Unicast, Broadcast, Multicast |
| IP Multicasting Features |
| IGMP / MLD Snooping | IGMP Snooping v1, v2, v3 / MLD Snooping v1, v2 Port Filtering Profile Throttling, Fast Leave Maximum Multicast Group : up to 1022 entries Query / Static Router Port |
| Security Features |
IEEE 802.1X
| Port-Based MAC-Based |
| ACL | Number of rules : up to 256 entries for L2 / L3 / L4 L2 : Mac address SA/DA/VLAN L3: IP address SA/DA, Subnet L4: TCP/UDP |
| RADIUS authentication & accounting |
| TACACS+ authentication & accounting, TACACS+ 3.0 |
| HTTPS, HTTP | Supported |
| SSL / SSH v2 | Supported |
User Name Password Authentication | Local Authentication Remote Authentication (via RADIUS / TACACS+) |
| Management Interface Access Filtering | Web, Telnet / SSH , CLI RS-232 console
|
| Management Features |
| CLI | Cisco® like CLI |
| Web Based Management |
| Telnet | Server |
| SNMP | V1, V2c, V3 |
SW & Configuration Upgrade | TFTP, HTTP Redundant firmware in case of upgrade failure |
| Modbus/TCP | Support for management and monitoring
|
| RMON | RMON I , RMON II |
| MIB | RFC1213 MIB II, Private MIB |
DHCP
| Server, Client, Relay, Snooping Snooping option 82 Relay option 82 |
| IP Source Guard | Supported |
| Port Mirroring | Supported |
| Event Syslog | Syslog server (RFC3164) (Support 1 server ) |
| Warning Message | System syslog, e-mail, alarm relay |
| NTP | Client |
| DNS | Client, Proxy |
| LLDP (IEEE 802.1ab) | Link Layer Discovery Protocol LLDP-MED |
| IPv6 Features |
| IPv6 Management | Telnet Server/ICMP v6 |
| SNMP over IPv6 | Supported |
| SSH over IPv6 | Supported |
| IPv6 NTP | Client |
| IPv6 QoS | Supported |
| HTTP over IPv6 | Supported |
| IPv6 Telnet | Supported |
| IPv6 TFTP | Supported |
IPv6 ACL
| Number of rules: up to 256 entries for L2 / L3 / L4 L2 : Mac address SA/DA/VLAN L3: IP address SA/DA, Subnet L4: TCP/UDP |
| L3 | View route, static route,RIP,OSPF,VRRP,NQA |
| Others Features |
Green Ethernet
| Supports IEEE802.3az EEE (Energy Efficient Ethernet) Management to optimize the power consumption Determine the cable length and lowering the power for ports with short cables Lower the power for a port when there is no link LED Power Management :Adjustment LEDs intensity |
| Cable Diagnostic | Measuring UTP cable normal or broken point distance |
Accessories
| Industrial SFP Transceiver |
| OSPL1E06D-85 | 100BASE-FX (850nm) |
| OSPL1E06D | 100BASE-FX |
| OSPL1E20D | 100BASE-LX |
| OSPL1E40D | 100BASE-EX |
| OSBL1E20D-35 | 100BASE-BX-U (TX 1310 RX1550) |
| OSBL1E20D-53 | 100BASE-BX-D (TX 1550 RX1310) |
| OSPL1G05D | 1000BASE-SX |
| OSPL1G06D | 1000BASE-SX (1310nm) |
| OSPL1G20D | 1000BASE-LX |
| OSPL1G40D | 1000BASE-EX |
| OSBL1G20D-35 | 1000BASE-BX-U (TX 1310 RX1550) |
| OSBL1G20D-53 | 1000BASE-BX-D (TX 1550 RX1310) |
| Industrial Power Adapter Din-rail |
| IM-DAC220/DC48V2.5A | AC220V to DC48V2.5A, -40～80℃ |
| IM-DAC220/DC48V5A | AC220V to DC48V5A, -40～80℃ |
| IM-DAC220/DC48V10A | AC220V to DC48V10A, -40～80℃ |
Company Profile
We manufacture and market fiber optic connectivity devices.
We provide solutions and services of industrial networking, fiber
optic, CCTV surveillance and fiber optic
conversion&transmission.
Din-rail gigabit industrial L2 L3 managed switch
Fiber optic Ethernet media converter
AHD TVI CVI Analog video fiber converter
Optical fiber module transceiver
CWDM/DWDM/OXC/DCI system
1 Q: What is your lead time?
A:It usually takes 2~4 working days to produce and then will send
goods.
2 Q: How will you send my goods?
A: We will send the goods by DHL, UPS or FEDEX, please check the
delivery details by the tracking number.
3 Q: Please tell me something about your MOQ
A: Our MOQ is 1 Pcs/Pair based on USD or EUR terms.
4 Q: Something about pricing.
A: Good quality components for our products. Low prices for big and
repeat orders.
5 Q: What is warranty time?
A: A year for commercial products and 3 years for industrial
products. Technical support will be offered free.
6 Q: Do you accept sample order?
A: Yes. Sample order to check our services and quality.
7 Q:Can I have any discounts?
A: Discounts will be given to repeat orders, regular clients and
discount products.
8 Q:Tell me something about your packing.
A: It is neutral packing. If you have your own packing box, we
support it.
