Mini Industrial 10BASE-T to 10BASE-FL Ethernet Media Converter
Industrial Ethernet Switch Advantages
► Auto-MDI/MDIX
► Complies with 802.3 10Base-T and 10Base-FL standards
► Extends network span from up to 2km(Multi mode)
► Interoperable with other 10Base media converters, 10Base,
10Base-T NICs, hubs or switches
► Provides LEDs for easy network monitoring
► Supporting Quality of Service (QoS), ensuring the transmission of
VoIP packets
► Supports 802.3x Flow control
► IEEE 802.3az Energy Efficient Ethernet (EEE)
Industrial Ethernet Switch Technical Indexes
| Conversion Means: | Store and Forward mode or Cut-Through mode |
| Wavelength: | 850nm |
| Buffer Space: | Built in 128Kb RAM for data buffer |
| Flow Control: | Full duplex: flow control; Half duplex: back pressure |
| Cable Length: | 50/125um or 62.5/125um Multi-mode duplex fiber optic cable for
10Base-FL 100 meters max. for UTP 2000 meters max. for fiber optic Multi-mode |
| Transmission type: | Base band |
| Connection switch: | 2-position 10Base-T switch on RJ-45 side (hub or W/S) |
| Interface |
| Connector: | 1x RJ45 10Base-T |
| Optical Port: | 1 x ST 10Base-FL |
| Electrical and Mechanical |
| Input Power: | 12~48VDC, 2-pin terminal block |
| Power Consumption: | 5W Max. |
| LED Indicators: |
| PWR: | Power Status |
| ACT: | Data LINK Status |
| TP: | Ethernet Status |
| FL: | Fiber LINK Status |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF | > 200,000 hrs |
Industrial Ethernet Media Converter Overview
E-link Mini Industrial 10Base-T Ethernet to 10Base-FL fiber optical
media converter converts your existing 10Base-T Ethernet to a
10Base-FL network with single mode or multimode fiber optic cable
up to 20,000 meters.This product is hardened, featuring a wide operating temperature
range of -40°C to 75°C and a rugged aluminum housing. The Ethernet
port supports both half-duplex and full-duplex mode. The rugged
hardware design ensures that your Ethernet equipment can withstand
demanding industrial conditions. The LNK-IMC10FST Series are easy
to mount on a DIN rail or in distribution boxes.
Connect 10 Mbps Ethernet segments to fiber segments without using
crossover cables. With a E-link 10Mbps Media Converter, you no
longer have to deal with mismatched transmit and receive cable
pairs. This converter contains a switch that senses the type of
circuit connected to the UTP port and automatically configures the
port to match. Because the UTP side is autosensing to MDI/MDI-X,
you can use either a straight or crossed cable to connect a switch
or NIC.
Ordering Information
| Model | Description |
| LNK-IMC10FST-MM | Mini Industrial 10BASE-T to 10BASE-FL Ethernet Media Converter,
multi-mode, 2km, 850nm, ST |
| Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
| Power Options | ► 24W/1A 24VDC Power Supply. Open Wire for Terminal Block |
| ► Power Supply is to be purchased separately. |
