Waterborne Polyurethane Easy Peel-Off Resin Suitable For Various
Substrates
Product Introduction
This product is a waterborne polyurethane resin made from aliphatic
polyether, featuring low viscosity, a medium-soft texture, a clear
finish, and outstanding adhesion along with hydrolysis resistance.
Incorporating aziridine, isocyanate, or carbodiimide crosslinking
agents can enhance the coating's water resistance, solvent
resistance, adhesion, and wear resistance.
Applicable substrates
| Appearance | Translucent blue liquid |
| Ionicity | Anionic |
| Solid content (%) | 30±1 |
| 100% modulus (MPa) | 5-7 |
| Tensile strength (MPa) | 20-35 |
| Elongation at break (%) | 600-800 |
| pH value (25℃) | 7-9 |
| Viscosity (mPa · s)/25℃ | ≤200 |
Storage conditions
5-35℃ , no freezing, avoid direct sunlight;
The paint should be sealed in time after opening and use;
Store in a sealed and cool place for for 6 months , can be
transported as non-hazardous goods
Special Tips
This material is complied according to our existing technology and
experience, the technical advice provided is sincere, but it is not
guaranteed to be used in all samples and formulations, all the data
are for users reference only
