Product Description
The detection method used by the Conventional Fire Alarm System is
smoke and heat. This helps detect fire early enough to prevent it
from spreading, which can cause significant damage to property and
loss of lives. The smoke detector is designed to detect the
presence of smoke in the air, while the heat detector is designed
to detect an increase in temperature. Both detectors work together
to ensure that the fire alarm system is effective in detecting
fire.
These conventional fire panels are designed to be conventional fire
panels developed from microprocessor, which can monitor and control
2, 4, 8, 16 zones fire information respectively. Each zone can be
connected with 30 conventional fire detectors. Each panel has
external devices control output points, Through the points, the
panel can control such external devices as bell, siren, flame
detector, beam detector etc.
The panel maximum load is 8 sounder outputs. The panel is designed
to have internal standby batteries and space for installation
(enough for 1 sealed acid storage batteries). The panel can
indicate states as normal, fault, fire alarm, short circuit.
Each kinds of panels have the same functions and same installation
and operation, except for having different monitoring zones and
output points.
Technical Parameters
| Type | Conventional |
| Compatibility | Compatible With Conventional Detectors |
| Alarm Output | Sound/Light |
| Weight | 2.3kg |
| Operating Temperature | -10°C To 50°C |
| Installation | Wall Mount |
| Operating Humidity | 10% To 95% |
| Power Supply | AC90-270V |
| Number Of Zones | 2/4/8/16 |
| Applications | Fire Alarm System |
Support and Services
The Conventional Fire Alarm System product technical support and
services include:
- Assistance with product installation, programming, and operation.
- Troubleshooting and diagnosis of technical issues.
- Software and firmware updates.
- Maintenance and repair services.
- Training and educational resources for end-users and installers.
Product Range
Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector
