Rotation Type Automatic Locking 6 Side Vacuum Impregnation Equipment

Rotation Type Automatic Locking 6-side Vacuum Impregnation Equipment

1.Rotation Cleaning

2.Equipment layout

3.Application

The vacuum impregnation system is suitable for: machined (multi-sided threaded holes) castings and threaded holes (above M3) machined castings, while the product surface cleanliness is high.

4.Technical Parameters

Note: The vacuum impregnation equipment is non-standard, and we could provide the equipment according to buyer’s specific requirement.

5.Equipment features

(1)The six-way centrifugal dewatering system can centrifuge and dry the impregnating sealant in the threaded holes of the six faces of the product, which reduces the consumption of impregnating sealant and saves costs compared with the traditional four-way centrifugal dewatering system, and also provides favorable conditions for the next step of cleaning.

(2) Using the rotation spray cleaning system, it can clean the threaded holes on six sides of the product without residue, no longer need to manually blow the residual liquid of the threaded holes with an air gun, because the artificial blowing is not environmentally friendly, the artificial air gun blowing cannot guarantee that every time can blow to each hole (visual fatigue).

(3)The casting parts vacuum impregnation equipment saves a lot of labor, and the cost effectiveness is very high.

(4)Use PLC automatic control to reduce labor costs.

6.layout plan