Automatic Rotation Type Vacuum Resin Impregnation System for
Casting Parts
1.Equipment diagram
2.Application
The vacuum casting parts porosity sealing equipment is suitable
for: machining (multi-faced thread holes) oil
stained castings and thread holes (M3 or more) machining oil
stained castings in case that customers do not
have cleaning equipment.
3. Equipment features
(1)Ultrasonic degreasing and rotation system are used to ensure
that the product is relatively dry.
(2)Vacuum drying saves drying time and provides high production
efficiency and rhythm
(3) The six-way centrifugal dewatering system can centrifuge and
dry the impregnating sealant in the threaded
holes of the six faces of the product, which reduces the
consumption of impregnating agent and saves costs
compared with the traditional four-way centrifugal dewatering
system, and also provides favorable conditions for the
next step of cleaning
(4)The vacuum resin impregnation equipment uses the rotation
cleaning system, it can clean the threaded holes on
six sides of the product without residue, no longer need to
manually blow the residual liquid of the threaded holes with
an air gun, because the artificial blowing is not environmentally
friendly, the artificial air gun blowing cannot guarantee
every hole blown at and also cause visual fatigue.
(5)The vacuum impregnation sealant equipment for castings saves a
lot of labor, and the cost effectiveness is very high.
(6)PLC and mechanical arm automatic control, reduce labor costs.
7.Technical Parameters
| Item | 600 | 800 | 1000 | 1200 |
| Working Pressure(Mpa) | 0.5 | 0.5 | 0.5 | 0.5 |
| Vacuum Degree (Pa) | ＜100 | ＜100 | ＜200 | ＜200 |
| Effective Size (mm) | 600 | 800 | 1000 | 1200 |
| Overall Height (mm) | 1300 | 1500 | 1800 | 2000 |
| Effective Height (mm) | 700 | 1000 | 1250 | 1500 |
Note: The vacuum impregnation equipment is non-standard, and we
could provide the equipment according
to buyer’s specific requirement.
8.Layout drawing
