Ultra-High Speed Dimensional And Defects All-in-one Measurement Device

Measurement Principle

When he object is caught by laser beam passed through lens, a bright and dark area will be formed on CCD,then the object dimension will be accurately calculated through software analysis and calculation.

Defect image display function, reducing the trouble some of finding defects

Featuring an incredibly short exposure time, F2010-k excels at capturing object images without any blur or shadow, ensuring precise measurement accuracy.

Applications

Technical Specification

NOTE:

(1)Set average number of times to 1150 and measure the ±2σ value of the round standard rod of diameter 10mm at the measurement area center.

(2)For object diameter of 10mm, the measurement accuracy is ±2um when it moves in the center of 8*8mm；

(3)PI feedback control and analog out options shall be ordered at placing device order.

(4) Move φ1mm round rod in the measurement area of 2*2mm and conduct measurement error;

(5) Move φ10mm round rod in the measurement area of 8*8mm and conduct measurement error;

(6) Move φ40mm round rod in the measurement area of 40*40mm and conduct measurement error;

(7) Industrial communication module and PI feedback control module is installed before ex-factory,so notify the demand before placing an order.