Brief introduction of wood briquette machine 2022 Hot Sale Sawdust
Briquette Press Biomass Wood Piston Press Briquetting Machine for
Fuel Bar Rods:
1. Good quality sawdust and wood biomass briquette machine.
Briquetting is a process that raw material is pressed under high pressure and temperature.
2. The machine uses a large screw to compress and extrude biomass
into briquettes which is hollow or hexagonal or quadrangular cylinder with a 15-20mm hole through the body.
3. During the process, no binder needed. So the briquette is a kind
of clean and green fuel that is ideal for use in furnaces, boilers and open fires. Good quality and high density and
strength.
Raw material for 2022 Hot Sale Sawdust Briquette Press Biomass Wood
Piston Press Briquetting Machine for Fuel Bar Rods:
1. Applicable raw material:
The raw materials of wood sawdust briquettes manufacturing machines
can be wood material like sawdust, wood branches, leaves, bamboo, etc; agricultural waste such as: surgarcane, bagasse, rice husk, corn stalk, corn cob,
grain stems, etc; fruit shells: peanut shell, coconut shell, coffee husk, etc.
2. Requirements of raw material:
1). The inlet size of raw material must be less than 3mm. If the
raw material size are bigger, you must crush them with wood crusher
firstly. The smaller the raw material, the smoothly the briquettes
surface, and the better the hardness and strength.
2). The moisture of raw material for briquetting, must be less than
12%, and the moderate is 8%-12%, otherwise, the outlet briquettes
are easily broken and have crevice. So before briquetting, you
shall check the moisture content, if too wet, please drying them
with sawdust dryer or under shunshine
Specification of hoist type charcoal furnace
Model | Power | Capacity | Weight | Main structure |
UT-C1 | 0.75kw | 2-3t/24h | 4t | 1*outer furnace, 3*Inner pots,3*covers,1*purification tank, 1*3t
lifting device |
UT-C2 | 0.75kw | 5-6t/24h | 8t | 2*outer furnaces, 6*Inner pots, 6*covers,2*purification tank, 1*5t
hoist equipment with e-motor |
UT-C3 | 0.75+1.5kw | 7.5-9t/24h | 12t | 3*outer furnaces, 9*Inner pots, 9*covers,3*purification tank, 1*5t
hoist equipment with e-motor |
UT-C4 | 0.75+1.5kw | 10-12t/24h | 16t | 4*outer furnaces, 12*Inner pots, 12*covers,4*purification tank,
1*5t hoist equipment with e-motor |
Why to make charcoal ?
1. Notable social benefits
Every year large amount of the crop residues such as straw ,
branches, sawdust, rice hulls, bamboo bits or other debris are
discarded,which causes great waste to our society. Now Our
equipments can turn these wastes to a kind of new efficient energy
--- charcoal, wood tar, etc.. The machine-made charcoal can replace
the natural charcoal, meanwhile, protect the forestry resources,
and ease the tense situation of current timber industry .
2 Remarkable economic benefits
At present our country’s economy is undergoing a period of rapid development, and the
charcoal is in great demand in the fields of industry, agriculture,
animal husbandry and civilian industries.In China, the cost of raw
materials of making charcoal is generally USD100/ton, but the
market price of charcoal is about USD400/ton, and the exporting price is more than USD600 /ton.
Furthermore,the by-products of making charcoal such as wood tar and
wood vinegar will bring much more profits.
3.Wide use of charcoal
charcoal in industry: It is mainly used in combining carbon of
industrial materials ,metallurgy, and the carburizing carbon of
chemical industry.
Charcoal in agriculture and animal husbandry: It can raise the soil
temperature, maintain soil moisture, ,mitigatethe organic
fertilizers and improve soil PH.
Charcoal in life: People often use charcoal heating, barbecue, as
well as the fuel used to the tea and tobacco drying.
