Second hand transformer flat aluminum bar extrusion press/ extruder
press
Gongyi UT MACHINERY
Contact: Orion
Mobile/whatsapp/wechat: 0086-18236968979
Skype: orion.chai
1. What brand of electrical appliances do you use? Can we specify a
brand?
In the electrical part, we mostly use Schneider and Siemens, and
can accept the brand designated by customers
2. What service can you supply?
Engineers available to service machinery overseas.
3. What’s the packages?
The normal package is wooden box. If export to foreign
countries,the wooden box will be fumigated or use polywood case.
4. Can you do turn-key project?
Yes, We have a mature technical team that can do turnkey
engineering.
5. What’s the payment terms?
30% by TT as deposit, 70% by TT or LC at sight vefore delivery.
6. What’s the delivery time?
Usually 10-14 working days
| Copper Continuous Extrusion Machine |
|
| Main Functional Unit: Continuous Extrusion Machine | Model | 400 |
| Nominal Diameter of Extrusion Wheel | 400mm |
| Rated Rotation Speed | 10 RPM |
| Power of Main Motor | 250 kW |
| Feed Stock | Copper Rod | Copper Rod |
| Diameter Tolerance | ±0.2mm |
| Yield Strength | 160MPa (Oxygen-free Copper Rod Produced by Upward Casting Process |
| | Copper Busbar |
| Finish Product : Flat Copper Wires | Sectional Area Range | 150-4500mm² |
| Max. Width | 170mm (or 20-70mm Copper Bar) |
| Standard | Conforms to GB5585.1-85 standard |
| Entire Production Line: Copper Wire Production Line | Average Output | 1100kg /h |
| Installed Capacity | 380V, 3 phase, 315KVA |
| Flash Amount | 3-6% |
| Workshop | Minimum Dimension | Length: 30m, Width: 8m, Height: 8m |
| Cooling Water | 80 m³/h (Cooling Tower) |
| Compressed Air | 0.7 MPa, 1 m³/min |
Main features
1, The continuous extrusion equipment is to extrude the copper rod
to generate high pressure and high temperature. Through mold extrusion forming, it can adapt to small-batch
production of various kinds, and can also adapt to large-batch
production.
2, Through the high-pressure and high-temperature treatment, the
influence of defects (cracks, burr and so on) existing in the raw
material on the finished products can be eliminated.
3, To increase the density. The finished products are extruded at high temperature and high
pressure, so that the surface is bright and clean, and the
dimensional precision is high.
4, The product does not require annealing, and the hardness shall
be uniform. The extrusion process can thoroughly eliminate the problem of raw
material joint, and the length of the required product is not
subject to the restriction of the length of the raw material.
5, The floor area of the extrusion equipment is small, the
installation and construction are simple, the energy consumption is
low, and the labor intensity is low. The safety during the production process is high, and the
production environment is clean, which completely meets the
environmental protection requirements.
Packaging & Shipping
1.Waterproof packing with the international export standard by
20ft, 40ft, 40hp container.
2. Equipment Fittings, Electric Motor and Power Cabinet will be
packed in Wooden Case or Iron Box. Other Equipment will be packed
by Color-Stripes Plastic Cloth.
3. Or as per customer's requirements.
