XK-610 Rubber Mixing Mill And The Amount Of Rubber Input Each Time
Is 120-150kg
Rubber mixing mill Introduction:
The advantages of XK-610 rubber mixing mill are as follows:
Good rubber mixing effect:
Strong shear force: The two rollers rotating inward in opposite
directions have a speed ratio, which can produce a strong shearing
effect on the rubber, effectively break the macromolecular chain
inside the rubber, make the various components evenly mixed,
improve the plasticity of the rubber, and facilitate subsequent
processing. It can well complete the plasticization, mixing and
removal of impurities in the raw rubber.
Obvious extrusion effect: The rubber will produce an extrusion
effect when passing through the gradually reduced roller spacing.
As the lateral pressure increases, the extrusion force also
increases, which is conducive to the plasticization and mixing of
the rubber and can improve the quality of the rubber.
Strong processing adaptability:
Can process a variety of materials: Not only suitable for natural
rubber, but also for various synthetic rubbers and blends of rubber
and other materials can be effectively processed to meet the
production needs of different products.
Applicable to a variety of processes: It can carry out
plasticization, mixing, tableting, crushing of raw rubber, mixing
and tableting of rubber, hot refining and supply of mixed rubber,
and crushing, mixing and tableting of recycled rubber.
Equipment structure and operation:
Simple structure: The overall structure is relatively simple,
without complex mechanical structure and control system, easy to
understand and master, and operators can operate proficiently after
certain training.
Easy maintenance: The various components of the equipment are easy
to disassemble and install. When the equipment fails, maintenance
personnel can easily perform inspection and maintenance, reducing
the difficulty and cost of maintenance.
Easy to clean: The open structure allows the equipment to be easily
cleaned after use, avoiding the impact of rubber residue on the
next production and ensuring the quality of the product.
Good temperature control:
The roller can be heated and cooled: The roller has heating and
cooling functions, and can accurately control the temperature of
the roller according to different rubber and process requirements,
ensuring that the rubber is processed at a suitable temperature,
and improving the effect and quality of rubber mixing.
Flexible temperature adjustment: Whether it is necessary to heat
and plasticize the rubber, or to cool it during processing to
prevent the rubber from overheating, the XK-610 rubber mill can
quickly and effectively achieve temperature adjustment.
High safety:
Equipped with emergency brake device: When the equipment is
abnormal or the operator needs to stop the equipment urgently, the
emergency brake device can quickly stop the roller from rotating,
avoid accidents and ensure the safety of the operator.
Complete safety protection measures: The equipment is also equipped
with various safety protection devices, such as protective covers,
emergency stop buttons, etc., which further improve the safety of
the equipment.
High production efficiency:
Large feeding volume at one time: XK-610 is a larger type of open
mill, and the feeding volume can reach 55-70kg at one time (taking
a specific model as an example), which can meet the needs of
large-scale production and improve production efficiency.
Stable operation: The equipment adopts high-quality materials and
advanced manufacturing technology, the precision of each component
is high, the operation is stable and reliable, which reduces the
downtime caused by equipment failure and improves the utilization
rate of the equipment.
Rubber mixing mill Technical Parameters:
Parameter/model | XK-450 | XK-560 | XK-610 | XK-660 | XK-710 |
Roll diameter(mm) | 450 | 560/510 | 610 | 660 | 710 |
Roll working length (mm) | 1200 | 1530 | 2000 | 2130 | 2200 |
Capacity (kg/batch) | 55 | 90 | 120-150 | 165 | 150-200 |
Front roll speed (m/min) | 21,1 | 25.8 | 28.4 | 29.8 | 31,9 |
Roll speed ratio | 1:1.27 | 1:1.17 | 1:1.18 | 1:1.09 | 1:1.15 |
Motor power (KW) | 55 | 90/110 | 160 | 250 | 285 |
Length(mm) | 5035 | 7100 | 7240 | 7300 | 8246 |
Width(mm) | 1808 | 2438 | 3872 | 3900 | 3556 |
Height(mm) | 1835 | 1600 | 1840 | 1840 | 2270 |
Weight (KG) | 12000 | 20000 | 44000 | 47000 | 51000 |
Q1: Where is your factory located?
A1: Qingdao BEISHUN machine co.,LTD is located at ,Huangdao
district ,Qingdao city, China
Q2: Are you an integrated supplier for rubber&plastic machine ?
A2: Yes, we can provide the complete solution line to customer
according to customer's requirement.
Q3: How about the quality control in your factory?
A3: BEISHUN has the SOP (Standard Operation Procedure) and all the
production step must follow up this SOP. Every machine needs at
least automatic running over 72 hours and must be inspected
carefully before shipment.
Q4: Will you offer the pre-sales service?
A4: Yes, we have an experienced pre-sales team to support customers
not only including machine, technology also water .electrical,
machine layout in factory, etc.
Q5: What about the after-service? Will you send your engineer to my
country to help commission and install the machine?
A5: Surely, we have many experience technical engineers for oversea
service, they would help you install machine and support training
to workers also.
Q6: What is the delivery time of the machine?
A6: Actually, the delivery time of the machines is depended on the
machine options. Normally, the delivery time of standard machine
could be within 10-30 days
Q7 : What is the warranty of the machine ?
A7: The whole machine's warranty period is 12 months and key parts
will be depended.
Q8 : Do you provide any spare parts with machine?
A8: Yes, BEISHUN will provide one set standard spare parts to
customer according to different machines
