DDR5 RDIMM / UDIMM Memory Tester With Long Latch, Desktop Computer
DDR5 Memory Test Card
Product features:
1. Applicable Scene: DDR5 memory test card is suitable for desktop
computer DDR5 UDIMM/RDIMM memory.
2. Computer Memory Failures: The failures of computer memory are
mainly due to poorcontact of the gold pins, wear and tear of the
gold pins, broken PCBs, damage to the dataline exclusion, open and
short circuits in the video memory, and poor memoryperformance,
etc.
3.LED Indicators: LED indicators are used to test all data lines of
the memory, and thenormal brightness is regarded as normal. When a
hardware fault occurs in the loop ofthese data lines, bright or no
light is abnormal.
4. Uses: lf the test indicator flashes, it means that the gold pin
is in poor contact. lf there isno indicator light, it means that
the hardware has an open circuit failure. Check the wearof the gold
pin, whether the exclusion is damaged, and whether the PCB is
disconnected.
5.Easy To Use: Insert the CR2032 battery into the battery holder of
the test card, or connect the type C cable , and then insert the
memory card to test.
Product description:
Computer DDR5 Memory Module Testing Instrument: Accurate Detection,
Reliable Guarantee.
Computer DDR5 Memory Module Testing Instrument: Accurate Detection,
Reliable Guarantee In the world of computer hardware, the
performance of DDR5 memory modules is crucial. Our computer DDR5
memory module testing instrument is a professional tool designed to
ensure the performance of memory modules. It is specifically
designed for DDR5 memory module devices and can comprehensively and
accurately detect various performance indicators of memory modules.
This testing instrument has two convenient power supply methods. It
can be connected to the power supply through the TYPE-C interface
and can be used for testing work at any time in an environment with
stable power supply; It can also be powered by a 3.6V button
battery,which can meet emergency detection needs even without an
external power source. Whether computer maintenance personnel are
on the repair site or electronic enthusiasts are in their own small
world, they can easily operate this memory module testing
instrument to ensure the quality of DDR5 memory modules and provide
reliable guarantees for the stable and efficient operation of
computer systems.
DDR5 memory module testing steps:
1. Open the memory slot ear clip on the test card outward and
insert the memory module vertically with both hands facing
downwards.
2. Select the voltage switch position, one side is powered by
CR2032 button battery, and the other side is powered by TYPE-C
external power (requires connection of TYPE-C data cable).
3. Then press the black button (Test SW) on the test card. If the
memory module is a good product, all the LED lights on the test
card will be on. If the memory module is a defective product,
the corresponding LED will not be on. Follow the silk screen
position number of the LED that is not on to find the defective
position of the gold finger on the memory module.
4. When the test is completed, release the black button, use your
hand to open the memory slot position outwards, and pull out the
memory vertically upwards.
DDR5 desktop memory module fault detection function:
1. Long term insertion and removal of gold fingers can cause wear
and tear, moisture in the air can cause oxidation of the gold
fingers, or dust can cause poor contact between the gold fingers.
2. Damaged resistor, the resistor on the memory can easily collide
and break when plugged or unplugged, or poor performance can cause
an increase in resistance.
3. PCB breakage. When users insert and remove memory, if their
golden fingers are not aligned with the motherboard slot or apply
excessive force, it can cause the PCB to bend. The PCB routing is
only 0.1 millimeters, and improper use can easily cause breakage.
For the above fault points of memory, this memory maintenance
tester has been developed. The tester uses more than 100 LED
indicator lights to measure each data line of the memory, and
easily finds the fault point based on the brightness indication of
the LED.
Package contents:
1 xDDR5 Memory Tester.
1x Type C cable.
4xPCB Spacer.
