12Ga X 1 1/2 '' Cup Head Weld Pins With 30 Mm Insulated Head
>>> Introduction of the Cup Head Weld Pins
Cup Head weld pins is welded through the insulation, allowing the
fabrication
to be done in one easy step. The head of the pin is attached to the
nail, so there is no need to add
a washer.Reduced labor time - Neat, finished appearance
Available as Mini-Cup (MC) or Full-Size Cupped Head (CH) Style,
with a beveled head.Flat head
available as a special order.
Pins are also available "insulated" for welding through foil-faced
materials to prevent arcing on the
foil facia.Longer lengths available as special order.Length of pin
to be used is determined by the
thickness, density & composition of the insulation being installed.
- Name: Cup head weld pins , cup head welding pins , cupped head pins
- Material:Galvanized steel,Stainless steel available on special order.
- Pin diameter: 1.8mm 2.0mm,2.7mm,3.0mm,3.4mm. etc
- Pin length:3/8''-12'' as request .
- Head/washer diameeter:30mm in common .
| MATERIAL | PIN | Head |
| LOW CARBON STEEL | LOW CARBON STEEL |
| PLATING | Standard Pin is Galvanized | Standard Washer is Galvanized | With insulated paper on the washer |
| Copper Plated is available |
| BEVEL | Washer edge is beveled to prevent cutting of insulation material |
| STAINLESS STEEL | Not standard, but available by special order |
| PAPER INSULATING WASHERS | Available, upon request, for welding through foil faced insulation |
>>>Specification Of Cup Head Weld Pins
Cup Head Weld/Welding Pins
| Material | Length | Pin Diameter | Head Diameter | | Galvanized Steel | 3/8" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 1/2" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 3/4" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 7/8" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 1" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 1-1/8" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 1-1/4" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 1-1/2" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 1-5/8" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 1-7/8" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 2" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 2-1/8" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 2-1/4" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 2-1/2" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 3" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 3-1/2" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 4" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 4-1/2" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 5" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 5-1/2" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 6" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Galvanized Steel | 8" | 14Ga,12Ga (2.7mm) | 1-3/16" (30mm) | | Note | The bold one is the most popupar length,the length and diameter
alcod could be customized. |
|
>>> Packing Of Cup Head Weld Pins
Carton or Plastic casks then packed with pallets.
>>> Applications of the Cup Head Weld Pins
1: Position insulation
2: Press cup head pin through insulation
3: Weld in place to complete installation
Cup Head Weld Pins
1. Cupped head insulation pins is a insulation fastener which is
used to fasten the insulation materials to sheet metal
of air duct, other heating, ventilating or air conditioning.
2. A fabricated part made up of a weld pin and a staked on
retaining washer,it is usually applied with a capacitor
discharge stud welder.
3. The method of application is to place the insulation onto a
metal surface, push the Cup Head weld pin through the insulation,
and weld affix (mount) the entire fabrication in one step. Now it
is widely accepted as labor saving fasteners
in the thermal and acoustical insulation markets for use in
industrial and commercial applications.
For pricing inquiries or sample requests, please contact us at
david@huihaomesh.com
