Hot Dipped Galvanized Hexagonal Woven Steel Gabion Mesh 8x10 Double
Twisted:
Gabions shall be manufactured with all components mechanically
connected at the production facility. The front, base, back and lid
of the gabions shall be woven into a single unit. The ends and
diaphragm(s) shall be factory connected to the base. The lid may be
a separate piece made of the same type mesh as the basket. All
perimeter edges of the mesh forming the basket and top, or lid,
shall be selvedge with wire having a larger diameter.
Gabion is divided into cells by means of diaphragms positioned at
approximately 1 m centres. The diaphragms shall be secured in
position to the base so that no additional lacing is necessary at
the jobsite.
Gabion Wire quality:
Heavy galvanized wire, zinc according to BS 443, min zinc coating
255 gr/m2 and tensile strength < 500 Ν/mm2
Heavy galvanized wire, with 5% aluminium (GALFAN or Zn95Al5), zinc
according to EN 10244-2, min zinc coating 255 gr/m2 and tensile
strength < 500 Ν/mm2
Plastic coated wire (PVC), min PVC coating 0.5 mm, inside heavy
galvanized wire, zinc according to BS 443, min zinc coating 255
gr/m2 and tensile strength < 500 Ν/mm2
Wire mesh diameter: 3.00 mm, Horizontal-selvedge wire diameter:
4.00 mm
Roll mesh weight (+/-) : 1,75 kg/m2, Gabion mesh weight (+/-) :
2,00 kg/m2
Gabion Dimensions:
Rolls in length of 20 m and width from 0,5 m up to 4 m (possibility
for production of special sizes)
Gabions (wire baskets): Length from 1 m up to 3,5 m, Width from 0,5
m up to 2 m, Height from 0,5 m up to 1 m
Comment 1: The gabions of length > 2 m, are divided into cells
every 1 m by diaphragms, for the better retaining of the gabion
shape during the filling with stones and the installation at the
worksite
Comment 2: The selvedge wires of the gabions have bigger diameter
than the diameter of the mesh wires, usually 3.90 mm
Comment 3: After the gabions are installed at the worksite, need to
be correctly binded together, in order to achieve better stability
of the wall construction
Comment 4: For the quicker stitch of the rolls and the gabions,
pneumatic or manual pistols are used, as well as special wire
stitch rings (connectors) of heavy galvanized wire or GALFAN wire,
which are being adjusted on the selvedge wires of the gabions. The
connectors are provided in reams of 40 pieces and in carton boxes
of 40 reams (total 1600 connectors per carton box)
| Gabion Box Size | 0.5m x 1m x 1m | 1m x 1m x 1m | 1m x 1.5m x 1m | 1m x 2m x 1m |
| Wire Diameter | 3mm | 4mm | 5mm | 6mm |
| Double horizontal wires style is available |
| Mesh Hole Size | 50mm x 50mm | 50mm x 100mm | 37.5mm x 100mm | 75mm x 75mm |
Can be customized according to demands of customers. |
Gabion Applications:
Stabilization and reinforcement of slopes with deviation
Construction of support walls with flat or tiered surface
Preventive stabilization of soil
Preventive net for rock-fall confinement
Strengthening of water barriers, canals and docks
Re-direction of water flow of rivers and canals
Coating of river banks, canal and stream banks
Reinforcement of bridge base and extrusion of hydropower stations
Retaining of mounds
