Single Axis Analog Inclinometer Sensor Current Output Pitch Roll
Sensor Meter Tilt Clinometer For Solar Tracking System
▶ APPLICATION
★ Equipment vehicle leveling
★ Bridge and Dam monitoring
★ High-altitude platform safety protection
★ Angle control of medical equipment
★ Attitude navigation of underground drilling rig
★ Leveling of railway gauge and gauge
★ Direction measurement based on tilt angle
★ Tilt monitoring of geological equipment
★ Mining machinery, oil drilling equipment
★ Equipment level control
★ Alignment control , curve control
★ Pitch angle measurement of directional satellite communication
antenna
▶ TECHNICAL DATA
| HCA510T | CONDITION | PARAMETERS | UNIT |
| Measure range | | ±10 | ±30 | ° |
| Zero output | 0° output | 2.5 | 2.5 | V |
| Measure axis | | X / Y | X / Y | AXIS |
| Resolution | | 0.001 | 0.001 | ° |
| Measure accuracy | @25℃ | 0.005 | 0.01 | ° |
| Zero Temp.coefficient | -40～85℃ | ±0.0005 | ±0.0008 | °/℃ |
| Sensitivity temp-coeffi | -40～85℃ | ≤100 | ≤100 | ppm/℃ |
| Power on time | | 0.5 | 0.5 | S |
| Response time | | 0.02 | 0.02 | s |
| Response frequency | 20Hz |
| output signal | 0~5V |
| EMC | According to EN61000 and GBT17626 |
| MTBF | ≥50000hours/times |
| Insulation Resistance | ≥100MΩ |
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) |
| Anti-vibration | 10grms,10～1000Hz |
| Protection grade | IP67 |
| Cables | Standard 1 meter length, wear-resistant, wide temperature, shielded
cable 4 * 0.4mm2 aviation connector |
| Weight | 190g(without cable) |
* This parameter only list ± 10 °, ± 30 ° series for reference. For
other measurement ranges, please refer to the nearest neighbor
parameter.
▶ FEATURES
★ Single / dual axis inclination measurement
★ Range ± 1～± 90° optional
★ Accuracy: Refer to technical data
★ Wide voltage input 9～36V
★ Output mode 0～5V
★ Wide temperature operation -40 ℃～+ 85 ℃
★ IP67 protection
★ High vibration resistance> 2000g
★ High resolution 0.001 °
★ Small size L90 × W59 × H34mm
ELECTRICAL CONNECTION
SINGLE AXIS CABLE WIRE CONNECTION
| Wire Color function | RED | WHITE | GREEN | BLACK | GRAY |
DC9~36V Power supply positive | Out X X axis output voltage | NC | GND Power negative | Signal ground |
GENERAL DESCRIPTION
The HCA510T/HCA520T-N is a high-precision analog voltage output
single/dual-axis inclination sensor, achieving a maximum precision
of 0.003°, making it one of the few high-precision inclinometers
available in China. Its primary function is to measure the
inclination of an object relative to a horizontal plane.
This sensor features a built-in micro solid pendulum that measures
changes in the static gravity field and converts them into
inclination changes, outputting a voltage signal (0-5V). It
utilizes a high-resolution differential digital-to-analog converter
and incorporates a secondary linearity and temperature correction
via an internal MCU system, so users do not need to perform
secondary linearity corrections. This also reduces the impact of
environmental changes on the product's accuracy.
Employing a non-contact measurement principle, the
HCA510T/HCA520T-N can provide real-time outputs of current posture
inclination. It is easy to use and does not require reference
surfaces for installation. With the latest MEMS technology, it
offers high precision, compact size, strong resistance to external
electromagnetic interference, and the ability to withstand shock
and vibration, making it an ideal choice for industrial equipment
and platform attitude measurement!
