Remote Control Long Service Horizontal Decanter Centrifuge For Cow
Dung
Description:
Centrifugal sedimentation is the working principle of this
centrifuge, it can separate two phases (suspended solid liquid and
liquid), solid phase is pushed out by spiral continually; this
equipment is a constant and high effective equipment which used in
separating solid-liquid.
It has a wide range application , it has a good applicability for
many material and can be widely used in chemical industry, light
industry, food, paper, mining and other industrial sectors. It
applies to carry out separating liquid and solid of the suspensions
material which weight thickness of solid phase ≤ 10% (or volume
concentration of ≤ 50% after settlement24 hours) and equivalent
diameter of solid-phase particle ≥ 0.005 ~ 2 mm, liquid-solid
density difference ≥ 0.05 g / cm 3, such as calcium carbonate,
calcium sulfate, polyvinyl chloride, lees, bean dregs , soy
protein, paper pulp, vegetable oil and palm oil, kaolin, white mud,
sludge from environmental protection industry and also applies to
various types of chemical products which use settlement centrifugal
separation principle, these material all can be carried out
effectively.
Advantages :
1. Lower cake transportation costs due to very dry solids
2. Better recovery of nutrients due to very high separation
efficiency
3. Lower fresh water consumption compared to other processes
4. Long service life
5. 24 h operating reliability
6. Optimum wear protection
7. Energy saving design
8. Easy to operate and maitain
9. Low maintain cost
10. Competive price for spare parts
Features
- All parts coming into contact with the product are made of
stainless steel.
- 3-phase AC motor for controlled torque starting via frequency
converter
- Approximately 80 to 90 % of the oil is recovered.
- Low personnel costs due to continuous and automatic operation.
- Highest g-force for higher solids output
- Adjustable bowl speed via VFD
- Automatic adjustment of differential speed via VFD
- Two motor drive
- Belts for both primary motor and secondary motor
Technological Parameters:
| Model | Drum diameter mm | Inlet liquid capacity㎥/h | Power of main/auxiliary motor Kw | Weight Kg | Dimension (max) mm |
| LW250 | 250 | 1-4 | 11/4 | 1200 | 2650*720*900 |
| LW(F)250 | 250 | 1-4 | 11/4 | 1200 | 2650*720*900 |
| LW250(W) | 250 | 1~5 | 11/4 | 1300 | 2750*720*900 |
| LW350 | 350 | 5~15 | 22/5.5 | 2000 | 3585*980*1238 |
| LW(F)350 | 350 | 5~15 | 22/5.5 | 2000 | 3585*980*1238 |
| LW350(W) | 350 | 5~18 | 15/5.5 | 2200 | 3412*1090*950 |
| LW(S)350 | 350 | 2~10 | 22/5.5 | 2000 | 3676*980*1238 |
| LW450 | 450 | 5~20 | 30/11 | 3000 | 4380*1080*1360 |
| LW(F)450 | 450 | 5~20 | 30/11 | 3000 | 4380*1080*1360 |
| LW450(W) | 450 | 5~28 | 30/11 | 3200 | 4380*1080*1360 |
| LW(S)450 | 450 | 5~15 | 37/11 | 3200 | 4195*1080*1360 |
*** F: Ex-proof, W:Waste water, S: Three phase FS:Ex-- proof and
three phase
