EWT 24V 18AH LCD BMS Bluetooth For Rechargeable High Cycle Battery
Pack
| species |
Lithium Iron Phosphate |
Voltage | 26650-24V |
capacity | 18AH |
Batteries | IFR26650 3.2V 3Ah |
size | 182*77*169mm |
weight | 3KG |
Maximum charging current | 10A |
Maximum discharge current | 30A |
Display screen | No |
Communication support | Bluetooth |
What is the repair method for a 18650 lithium-ion battery with a
voltage of 0V
1. Take off your 18650 lithium-ion battery after all the use, solve
it with temperature, the battery will greatly shorten the use time
in the case of unstable temperature, because the battery is not
charged and a considerable part of the lithium-ion already has
memory electricity.
2. There is another way, remove the battery, put it for about a
week, and slowly consume the electricity, after the machine is
completely consumed. Then full flush, estimate that your charging
time must be very short, after the charge is full, disconnect and
flush again, repeat a few times, absolutely effective.
3. Use a clean eraser or other cleaning tools to gently wipe the
metal contacts on the lithium-ion battery and the metal contacts on
the mobile phone, which will help the charging condition and the
durability of the power.
4. Let the 18650 lithium-ion battery that is close to scrapping be
completely discharged, and then recharge to activate the battery.
The detailed method is to deeply discharge the mobile phone, that
is, to achieve a deeper degree of recharging by depleting the
internal electrical energy, which requires some unconventional
methods. Connect the phone to a small low-voltage bulb with a
specific device, and the power inside the battery will be
transferred to the small bulb until it all comes on.
