The Shield Type UAV/drone signal jammer PTC-UAV-S3 is our company
specially designed drone Jamming product against the widespread use
of commercial Drones / UAVs. It disables the targeted UAV / Drones
by jamming the remote-control signal and GPS signal, so as to force
the UAV to fall or return. The jamming distance reaches more than
800 meters. ---Technical parameters----- Channel | Working Frequency | Channel Power(±1dBm) | CH1 | 1550 - 1620MHz | 40dBm/10W | CH2 | 2400 - 2500MHz | 40dBm/10W | CH3 | 5725 - 5850MHz | 40dBm/10W | Total Working Channels | 3 channels | Total Working Output | 30W | Shielding distance | 500-1000m | Technology Solution for option | VCO, BTS, AI for option | Battery | 24V/3AH | Battery working time | 1hour | Built-in internal Antenna | High gain Directional antenna | Power consumption | 90W | Weight | 1.5Kg | Size(Length * width * height) | 280x180x54mm | Humidity | 5%-95% | Operation temperature | -20 to +50℃ |
| | |
 1. Frequency band and output power are optional;
2. Integrate the main equipment, battery, and antenna to increase
equipment mobility
3. Different frequency bands can be independently controlled by
different switches;
4. Optional AC or DC power supply;
5. Power amplifier protection design ensures the reliability of
equipment work;
6. Using imported chips, high integration, good stability, slow
start circuit design;
7. The rechargeable battery can support the jammer to work for 30
minutes to 1 hour;
8. Batteries can be quickly replaced.
9. Light Weight and Friendly use
10.Effective segmentation to block each drone controlled signals.
11.Imported chips, slow start circuit design can avoid the sparking
phenomenon caused by mechanical switch, high integration and stable operation.
12.Perfect self-protection function, when the device is overheated,
over output -power, standing wave and other fault alarms, the drone
signal jammer will automatically cut off the failed module to avoid
damage to the drone shield.
Detailed Photos:
How to Use:
Put the Drone jammer to point at your target drones, it will cut
off the signal between the controller and the drones. The drone
will not be able to receive any control signals or transmit any
camera signals back to the controller and drop down. The drone will
be officially MIA (missing in action).
Applications:
Any sensitive locations where the drones/UAVs are not allowed to
use, like Government, Oilfield, Homeland Security, Large Gathering
Place, Counter-terrorism, Army Security, Airport Security,
Petrochemical Industry, Sports Venues, VIP Convoy Protection,
Schools and Universities etc.
|
