Q '-What’s the material of your Truck Camper body?
A.- We can produce FRP (Fiberglass Reinforced Plastic), PPGI steel and
Aluminum composite with XPS/PU insulation Sandwich panels for the
truck camper box. The Core Material can be PU, XPS.
Q '- If want the price, what should offer us the information?
A.-You need offer us the material, size (LxWxH and the thickness of
the panel) and quantity of the truck body as the basic
information. The sketch or the design drawing is much appreciated.
Q '-Can you pre-cut openings for windows and doors?
A.-We can offer this service with cost as we have embedded strengthen
parts inside, but that will be confirmed before producing. your own
Openings can easily be cut with a jigsaw and plastic rated blade,
but the embedded strengthen parts cannot make. So if it will work
in really bad expedition, you'd better let us pre-cut openings for
windows and doors.
Q '-Can you do departure angles?
A.-Yes, we have two sizes of the box shape, one is the standard square
shape, the other is the departure angle design. Please mark the
desired angle (including dimensions) in the quoting template if you
need.
Q '-Can you design subframes?
A.-We have the service of this, but you need supply the full chassis
layout to us in advance.
Q '-Can I use different windows and doors than what’s listed on
your specification?
A.-Yes. However, we highly recommend our windows and doors as they
work in perfect balance with our camper bodies.
Q '-Can I order a camper body with an alcove?
A.-Yes. Please ask us for our alcove quoting template.
Q '–What’s included in the shipment?
A.-1. CKD type with All panels cut to size (other than departure
angle), 2. CBU type with assembled box per your requirements.
Q '–Can you help with the interior layout?
A'–No. We are solely a camper body supplier, not a full-scale
outfitter/design office.
Q'- How To Match a Camper to Your Truck
A.-Truck manufacturers provide consumers with certain ratings to help
determine the capacities of the truck, as manufactured. Some of
these ratings are posted on the driver's side door jam, on a label
in the glove box, or in the owner's manual or other literature. If
you already own a truck that you intend to use for a camper, it's
always wise to take it to a commercial truck scale to determine the
actual weight of the truck. That information along with your truck
capacity information will help you determine the remaining
capacities for carrying and/or towing.
Camper weights both dry and wet vary depending on what optional
equipment you have installed and how full your holding tanks are.
Also, take into consideration the weight of passengers, gear and
trailer tongue weight (if applicable).
Q'- What is Truck Weight Capacity Ratings
A.-(Usually Found on the Driver Door Jam) The value set by the truck
manufacturer as the loaded weight of the vehicle plus the loaded
weight of any trailer it tows.
The GVWR, GAWR for the front axle and GAWR for the rear axle are
generally posted by the manufacturer on the truck door post or in
the glove compartment.
The manufacturer determines the GVWR, GAWR and CGVWR at the time of
manufacture and manufacturers are unwilling to change this number
once the vehicle is built to a dealer or sold even if modifications
have been made to the truck.
Q'- What is GVWR (Gross Vehicle Weight Rating)
A.-The value set by the truck manufacturer as the loaded weight of a
single vehicle.
Q'- What is GAWR (Gross Axle Weight Rating)
A.- The value set by the truck manufacturer as the load-carrying
capacity of a single axle system. There is a separate (and
different) GAWR for the front and rear axles
Q'- What is CGVWR (Combined Gross Vehicle Weight Rating)
A.The value set by the truck manufacturer as the loaded weight of the
vehicle plus the loaded weight of any trailer it tows.
The GVWR, GAWR for the front axle and GAWR for the rear axle are
generally posted by the manufacturer on the truck door post or in
the glove compartment.
The manufacturer determines the GVWR, GAWR and CGVWR at the time of
manufacture and manufacturers are unwilling to change this number
once the vehicle is built to a dealer or sold even if modifications
have been made to the truck.
Q'- How to Determine Your Load Carrying Capacity
A.The first step is to determine the load carrying capacity of your
truck by taking the truck to any commercial weight station and
obtain weights for the total truck and the weight on each axle. At
the time of weighing, the fuel tanks should be filled and the
driver and expected normal number of passengers should be in the
truck cab. The total weight of the truck subtracted from the
truck's GVWR will be the cargo weight the truck can carry.
To determine the approximate weight of a camper, add the weight of
all optional equipment (both factory- and dealer-installed) to the
camper wet weight that’s posted next to the camper's entry door.
Also add the weight of supplies, personal gear and other cargo that
might be carried in the camper or truck. You can also use the Get
RV Quote link to get an approximate weight of the model of your
choice with options.
