About the M9484C VXG Vector Signal Generator
The M9484C VXG is the industry's first vector signal generator
capable of generating signals up to 54 GHz with 2.5 GHz of
modulation bandwidth per channel. The VXG vector signal generator
helps you deliver the next frontier of wireless technology such as
5G and satellite communications with a fully integrated,
calibrated, and synchronized solution.
Performance Specifications for Keysight M9484C VXG Vector Signal
Generator
Definitions and Conditions
Specification
Specifications represent the warranted performance of a calibrated
Keysight M9484C VXG Vector Signal Generator that has been stored
for a minimum of 2 hours within the operating temperature of 0 to
50 °C, unless otherwise stated, and after a 45-minute warm-up
period. The specifications include measurement uncertainty. Data
represented in this document are specifications unless otherwise
noted.
Typical
Typical (typ) describes additional product performance information
for the Keysight M9484C VXG Vector Signal Generator that is not
covered by the product warranty. It refers to performance beyond
specifications that 80 percent of the units exhibit with a 90
percent confidence level at room temperature (approximately 25 °C).
Typical performance does not include measurement uncertainty.
Nominal
Nominal (nom) values indicate the expected mean or average
performance of the Keysight M9484C VXG Vector Signal Generator or
an attribute whose performance is by design, such as the 50-ohm
connector. This data is not warranted and is measured at room
temperature (approximately 25 °C).
Measured
Measured (meas) describes an attribute of the Keysight M9484C VXG
Vector Signal Generator that is measured during the design phase
for purposes of communicating expected performance, such as
amplitude drift vs. time. This data is not warranted and is
measured at room temperature (approximately 25 °C).
All of the above apply when using the Keysight M9484C VXG Vector
Signal Generator in its default settings unless otherwise stated.
Highlights - Keysight M9484C VXG Vector Signal Generator
Designing 5G and satellite communication systems requires tight
design margins and timelines, complex modulation, and adherence to
stringent standards. You’re facing a whole new set of design and
test challenges, including wider bandwidths, higher frequencies,
and greater system complexity. The Keysight M9484C VXG Vector
Signal Generator provides the industry’s first vector signal
generator with up to 54 GHz frequency range and 2.5 GHz of
modulation bandwidth in a single instrument, or up to 110 GHz with
the V3080A frequency extender and 5 GHz with channel bonding, to
enable your next breakthrough.
- Supports MIMO real-time fading for all 3GPP 5G NR base station
conformance tests with PathWave Signal Generation software.
- Covers all 5G NR frequency bands and V- / W-band for satellite
communications.
- Generates complex wideband signals needed for carrier aggregation
and digital pre-distortion (DPD) applications.
- Delivers superior RF performance for accurately characterizing
devices under test, such as phase noise, error vector magnitude
(EVM), and adjacent channel power ratio (ACPR).
- Simplifies MIMO and beamforming test setups with up to 4
synchronized and phase-coherent channels in one instrument and more
than 32 channels in multiple instruments.
- Streamlines complex receiver test scenarios with the world’s first
8-virtual-signal emulation per RF channel.
Frequency - Keysight M9484C VXG Vector Signal Generator
Frequency Options
| Option | CW frequency range | RP output connector |
M9484C - 506 | 9 kHz to 6 GHz | Type-N (f) |
M9484C - 508 | 9 kHz to 8.5 GHz | Type-N (f) |
M9484C - 514 | 9 kHz to 14 GHz | 3.5mm (m) |
| M9484C - 520 | 9 kHz to 20 GHz | 3.5mm (m) |
M9484C - 532 | 9 kHz to 31.8 GHz | 1.85mm (m) |
M9484C - 544 | 9 kHz to 44 GHz | 1.85mm (m) |
M9484C - 554 | 9 kHz to 54 GHz | 1.85mm (m) |
FAQ:
Q: What delivery method do you use? and delivery time?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual
delivery time is 4-7 workdays.
Q: How can I ask any other question?
You can contact us online or leave us messages below.
Q: What is your payment term?
100% T/T payment before shipment.
