Gigabit Passive Poe Injector and Splitter Kit Includes Passive
Injector & Splitter Sides
Fiber Optic Accessories Advantages:
► 9~48V input. Plug Play, no configuration.
► IEEE 802.3at/at compliant.
► Includes Passive Injector & Splitter Sides
► Works with all DC powered non-PoE devices
► Support10/100/1000M BASE-TX.
► Ethernet Cable Data rate: 10/100/1000Mbps.
► Input Voltage: 9V~ 48V.
► Power Jack: 2.1x5mm male.
► Power Plug: DC 2.1X5.5mm female.
► Easy to install PoE Application for AP, CPE, IP Camera, IP Phone
► Use the Power Supply from Powered Device
► Works up to 150 feet (depending on cable used and power draw of
device)
Overview
This LNK-POE2GP passive power-over-Ethernet (PoE) gigabit splitter
and injector device are compliant
with the IEEE 802.3af/at standard. It has 5.5 x 2.1 mm size DC
connectors. It will also provide superior
operation for 10 Mbps 10BASE-T and 100 Mbps 100BASE-TX in addition
to the gigabit (1000 Mbps)
1000BASE-T operations. E-link engineers designed the internal wire
construction with solid copper,
24 AWG wire. It utilizes shielded connectors with an internal drain
wire. A green LED indicates
presence of voltage.
Application
Technical Indexes
| Standards: | IEEE802.3 10Base-T |
| IEEE802.3u 100Base-TX |
| IEEE802.3ab 1000Base-T |
| IEEE802.3af Power over Ethernet |
| IEEE802.3at Power over Ethernet |
| Forward Filter Rate: | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) |
| 1,488,000pps (1000Mbps) |
| Input Voltage | 9 to 48VDC +/- 5%, Maximum 56VDC |
| Power Pin Assignment | • Data provide over pairs 1/2(+) and 3/6(-) |
| • Power over spare pairs 4/5(+) and 7/8(-) |
| Ethernet Data Rate | 10/100/1000 Mbps *1000 Mbps - 1 Gigabit |
| Maximum Output Current | 1A |
| Over Current Protection | Yes |
| Ethernet Connectors | Shielded with Internal Drain Wire |
| Internal Wire Size | 24 AWG Solid Copper |
| DC Connector Size | 5.5 x 2.1 mm |
| LED | Green Indicating Voltage Present |
| Housing Material | ABS |
| Dimensions | Length = 8 inches (20.3 cm) |
| Weight: | 96 grams (3.3 ounces) |
| Operating Temperature: | 0°C to 45°C (-32°F to 113°F) |
| Storage Temperature: | -30°C to 70°C (-22°F to 158°F) |
| Relative Humidity: | 5% to 90% non-condensing |
Orrdering Information
| Model | Description |
| LNK-POE-2GP | Gigabit 10/100/1000 802.3af/at Passive Power-over-Ethernet (PoE)
Injector - Splitter Mid-Span Kit with 5.5 mm x 2.1 mm Size DC Connectors |
