IEC 62196 Connector Temperature Rise Testing Equipment For
Temperature Rise Test
Product information:
Comply with GB15287, GB15288, GB20234.1, GB2099, GB16915, GB15092,
GB17465, GB11918, GB13140, GB14048, GB20234, GB7251, UL310, UL486,
UL498, UL817, UL941, UL943, UL1053, UL1 059, IEC60309, IEC60998,
IEC60669, IEC61058, IEC60439, IEC62196, EIA-364-70 current and
temperature rise test methods for electronic connectors and other
relevant standards for electrical accessories. It can be used to
assess the surface heating of electrical accessories when connected
to a load current and whether the electrode temperature rise meets
the requirements of the standard.
It adopts independent programming software and computer-controlled
operation. All standard test procedures and data judgments are
controlled by the system, making it easy to operate. It is used to
assess the surface heating of the charging interface and electrical
accessories when the load current is connected, and whether the
electrode temperature rise meets the requirements of the standard.
Technical Parameter:
1. Computer programmable current source:
Maximum output voltage: not exceeding DC5V
Output constant adjustable test current (2 sets of independent
outputs, can work at the same time):
①.DC5A~100.0A digital continuously adjustable
②.DC100A~2000A digital continuously adjustable
Output voltage display accuracy: ± (0.25% reading + 0.25% range)
Current display accuracy: ± (0.25% reading + 0.25% range)
Test current stability: ± (0.25% set value + 0.25% range)
2-channel voltage drop monitoring: 1-300.00mV, display accuracy ±
(0.25% reading + 0.25% range)
Impedance: calculated value of voltage drop ÷ current
2. Control mode:
Continuous mode power-on time: 1～9999.99 hours
Power-on time/power-off time: 1～9999.99 hours
Number of on-off times: 1 to 9999 times, with power-off memory
function, automatic shutdown when the number reaches
3. Temperature rise test:
Temperature measurement range: 0~260℃ Accuracy ±(0.3% of reading
+1℃); Resolution: 0.1℃.
Temperature measurement points: 16 channels (including 1 point for
measuring ambient temperature).
Temperature measuring thermocouple: American Ω Company T-type 30AWG
filament thermocouple, 2 meters long, 16 in total.
The temperature probe can be tested with electricity without
damaging the instrument.
Temperature data collection: It is completed by the TWC-2A
multi-channel temperature tester designed and produced by our
company, equipped with RS232 communication interface and data
recording interface.
Temperature scanning speed: 1~255 seconds for all channels.
Temperature data recording: automatically completed by computer,
configured with computer testing software.
The software can set the ambient temperature channel, and the
ambient temperature can be automatically subtracted when collecting
data.
4. Equipped with special testing software:
Software functions: A. Different working modes can be set:
continuous mode/on-off mode/automatic temperature control mode
B. Current flow control setting, the ambient temperature channel
can be set, and the temperature rise can automatically subtract the
ambient temperature
C. Automatically record data and draw curves: temperature
rise/voltage/current/voltage drop (impedance)-time curve
5. Power supply: AC220V, 60Hz, 15KVA
6. Equipped with a touch screen integrated industrial control
computer (Pennium 4/1.8G or above CPU, 4G memory, 64G solid state
drive, 15-inch LCD monitor), installed with XP Chinese (or English)
operating system and OFFICE processing software.
7. Test box: Equipped with an acrylic windproof test box about 800
wide * 400 high * 400mm deep, which is convenient for users to
test.
Test fixture: user-made
Test station: The product under test can be connected in series at
multiple stations, as long as the maximum output capacity is not
exceeded.
8. Dimensions: Approximately 800mm wide × 800mm deep × 1800mm high,
weighing approximately 450kg. The cabinet is equipped with
heavy-duty brakeable movable casters for easy fixing and movement.
9. Equipped with overload protection and overcurrent protection
functions
When the equipment stops, the current output is automatically cut
off.
The equipment can work continuously for a long time and is stable
and reliable
10. Install an electronic control output with relay (NC NO COM).
Install a 220Vac outlet for fan control.
11. Add humidity sensor and computer collection data display.
12. Wi-Fi network equipment: Data can be connected to a Wi-Fi
network to follow up the processes outside of the laboratory.
7. Test box: Equipped with an acrylic windproof test box about 800
wide * 350 high * 400mm deep, which is convenient for users to
test.
Test fixture: user-made
Test station: The product under test can be connected in series at
multiple stations, as long as the maximum output capacity is not
exceeded.
8. Dimensions: Approximately 800mm wide × 800mm deep × 1800mm high,
weighing approximately 450kg. The cabinet is equipped with
heavy-duty brakeable movable casters for easy fixing and movement.
9. Equipped with overload protection and overcurrent protection
functions
When the equipment stops, the current output is automatically cut
off.
The equipment can work continuously for a long time and is stable
and reliable
