Product Description
Product Name:SATA 06Pin Female Solder Type 180° Au 30u'' Plated
Wire to Board Connector
Basic specification:
Number of terminals: 6Pin (i.e., 6-pin), designed for SATA interface to meet the needs
of data transmission and power connection.
Type: Female, for use with the corresponding male connector.
Solder Type: Solder Type (Soldered), provides a solid electrical connection by
soldering the connector to the board.
Angle: 180° (Straight or Right Angle), depending on the specific design,
the connector may be inserted directly into the circuit board at an
angle of 180° for ease of installation and layout.
Plating: Au 30u'' Plated (30 micro inches of gold plating), the gold
plating provides excellent electrical conductivity, oxidation
resistance and corrosion resistance, helping to ensure the
stability and reliability of signal transmission.
Connection: Wire to Board, for connecting wires or cables to a circuit board.
Features and Benefits:
1. High conductivity: The gold-plated layer ensures good conductivity, reduces signal
attenuation and interference, and improves the speed and stability
of data transmission.
2. Corrosion resistance: The gold-plated layer effectively resists oxidation and corrosion,
extending the life of the connector.
3. Solid Connection: Soldered design provides a solid electrical connection, reducing
poor contact problems caused by vibration or loosening.
4. Easy to install: 180° design facilitates installation and layout in limited space,
improving productivity.
Application Range:
The connector is widely used in electronic devices that require a
SATA interface, such as solid state drives (SSDs), mobile hard
disks, computer motherboards, and so on.
It is suitable for occasions with high requirements for data
transmission rate and stability, such as servers, data centers,
etc.
Caution:
During installation, the welding quality should be ensured to avoid
problems such as false welding or short circuit.
When using the connector, you should pay attention to the
environment of the connector, avoid using it in humid, high
temperature or corrosive environment, so as not to affect the
performance and life of the connector.
Regularly check the contact of the connector, if there is any
loosening or corrosion phenomenon should be dealt with in time.
