The Two-Cloth-One-Membrane Composite Geomembrane Is A
High-Performance Geotechnical Material
Product Introduction
The two-cloth-one-membrane composite geomembrane is a synthetic
material, which is composed of two layers of geotextile and one
layer of geomembrane, and has the functions of anti-seepage,
isolation, reinforcement, etc. The width of this material is
usually 4-6 meters, and the weight ranges from 200-1500 grams per
square meter. It has high physical and mechanical performance
indicators such as tensile strength, tear resistance and bursting
resistance.
Product Properties
* Good anti-seepage and waterproof performance
* Good elasticity and the ability to adapt to the deformation
* Good ageing resistance, corrosion resistance ability
* Under high temperature use and long service life
Product Application
The product has high strength, good extensibility, large modulus of
deformation, acid and alkali resistance, corrosion resistance,
aging resistance, impermeability and so on.
Construction
Composite geomembrane can meet the needs of water conservancy,
municipal, construction, transportation, Subway, tunnel,
engineering construction, such as anti-seepage, isolation,
reinforcement, crack reinforcement and other civil engineering
needs. Commonly used in dykes, drainage ditch anti-seepage
treatment, as well as waste yard anti-pollution treatment.
Product Specification
Product Specification and Technical Index (GB/T 17642-2008)
| Item | Specifications | Remark |
| Geotextile Unit Weight (g/㎡) | 300 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | |
| Geomembrane Thickness (mm) | 0.25-0.35 | 0.30-0.50 | |
| Nominal Fracture Strength (KN/m) | 2.50 | 7.50 | 10 | 12 | 14 | 16 | 18 | 20 | |
| Breaking Strength (KN/m,≥,LD/TD) | 2.50 | 7.50 | 10 | 12 | 14 | 16 | 18 | 20 | |
| Standard Intensity Corresponding Elongation Rate (%) | 30~100 | |
| CBR Burst Strength (KN,≥) | 0.70 | 1.50 | 1.90 | 2.20 | 2.50 | 2.80 | 3.00 | 3.20 | |
| Longitudinal Tear Strength (KN,≥) | 0.05 | 0.25 | 0.32 | 0.40 | 0.48 | 0.56 | 0.62 | 0.70 | |
| Hydrostatic Pressve (Mpa) | See List Below | |
| Peel Strength (N/cm,≥) | 6 | |
| Vertical Permeability Coefficient (cm/s) | According to design or contract mentioned. | |
| Width Variation (%) | -1.00 | |
|
Specification
Item | Geomembrane Thickness (mm) | Remark |
| 0.20 | 0.30 | 0.40 | 0.50 | 0.60 | 0.70 | 0.80 | 1.00 |
| Hydrostatic Pressve (Mpa) | One geotextiles with one geomembrane | 0.40 | 0.50 | 0.60 | 0.80 | 1.00 | 1.20 | 1.40 | 1.60 | |
| Two geotextiles with one geomembrane | 0.50 | 0.60 | 0.80 | 1.00 | 1.20 | 1.40 | 1.60 | 1.80 | |
