Drager Fabius GS Anaesthesia Machine Motor Type F9M4RR100
►Quick Detail:
Drager Fabius GS Anaesthesia Machine Motor Type F9M4RR100
·Piston design, electrically controlled
·Accurate delivery of tidal volume
·No need to consume driving gas, only need to supply fresh airflow
·Machine free automatic PEEP
·Roll film design, extremely low compliance, precise piston
positioning
Suitable for all patients: newborns to adults
►Analysis and exclusion:
Respirator motor crashes or the motor gets stuck.
Generally, motor top flushing is caused by the loss of control of
motor speed. The motor rotation is indirectly controlled by the
encoder disc, which has a dense circle of small holes around it
that can pass through the light beam. The upper and lower parts of
the encoder disc are the light-emitting tube and the photoelectric
receiver, respectively. The rotation of the motor and encoder
causes the light path to be turned on and off, realizing the
counting function and thus controlling the number of rotations of
the motor. For example, if we set a tidal volume of 100 mL, the
encoder controls the motor to rotate 10 times, and the motor pushes
the ventilator piston up 5 cm to accurately produce a tidal volume
of 100 mL. After a malfunction occurs, open the outer cover of the
respirator and use a piece of paper to block the light beam. Check
if the respirator motor still hits the top. If so, the
light-emitting tube and photoelectric coupler are damaged and need
to be replaced with a set of photoelectric couplers and
light-emitting tubes. If the motor stops rotating after blocking
the beam, please check the control circuit of the motor. If the
motor connecting rod gets stuck due to the motor hitting the top,
you can first disassemble the motor and reassemble the motor
connecting rod to solve the problem. In addition, continuous
charging of the motor can also cause damage to the motor drive
circuit, which can be determined by measuring whether there is
voltage output. When there is no voltage output, please check the
on/off of the four high-power transistors on the drive circuit
board. After replacing the same type of transistor, the motor can
resume normal operation. In summary, the above fault phenomena all
occur in the abnormal operation of the respirator, but the causes
are fundamentally different. Our engineering and technical
personnel usually observe and analyze more, understand from the
principle, and accumulate more maintenance experience. Once an
abnormality occurs, they can quickly make a judgment and handle it
in a timely manner to improve work efficiency.
►Key features:
| Type: | Drager Fabius GS Anaesthesia Machine Motor Type |
| Warranty period: | 90 Days |
| Shipping Date: | 3-5 Working Days |
| MODEL: | F9M4RR100 |
| Storage temperature: | -20-70°c |
| MOQ: | 1 PCS |
| COLOR: | GRAY |
| Delivery Date: | 3 - 5 Working Days |
| Package | Standard export packaging |
► Company situation:
The company has been professionally operating various brands of
original medical monitoring instruments since 2015. The company has
many professional senior engineers and has sufficient ability to
undertake various medical equipment maintenance work. Covering
motherboards, sensors, probes, modules, connectors, shells, etc.
for various medical monitoring equipment.
►About delivery:
We default to express delivery by DHL,Fedex,etc.We will contact you
as soon as possible when sending express delivery. If you have any
questions after receiving the express delivery, please feel free to
contact us at any time.
