Counter Flow Cooling Tower PVC Filler 4ft Width Hanging Cooling Tower Fill

Description:

The ML cooling tower fill is one of famous and popular PVC cross flow fill in all of the brands cooling tower fill. It is good sales in the worldwide and have a good lifetime in use.

1> The thickness is from 0.3mm to 0.45mm which the raw material PVC sheets are requested good quality and strong enough for the ML fill.

2>The width are 610mm,750mm,813mm,915mm,1000mm,1220mm,1520mm,the new mould and machine for 1900mm width ML fill is in development.

3>The length of ML cooling tower fill can be customized.The normal length is 1854mm,2060mm,2450mm,2678mm,2980mm,3090mm and so on.

4>The pitch is 19-20mm,that means the distance between two loose fill sheets is 19-20mm.

*This type is a film fill system designed for counterflow towers offering you several distinct advantages.
Crossed corrugations provide the surface area and turbulence to develop efficient heat transfer. The corrugations inherently establish uniform fill sheet spacing at 0.75.

*Using MC75 film fill in place of existing splash type fill in counterflow towers usually means reduced fill height, which translates into reduced pumping head. MC75 will also provide greater cooling tower capacity, which means your current performance level will require less fan energy.

*The fill pack depth(air travel) is variable to provide the proper heat transfer area within a single fill layer. If another layer of fill is necessary for situations where additional air travel is required, it will be limited to only one. Limiting the number of interfaces between packs minimizes restrictions that usually cause fill clogging. MC75 counterflow fill can be hung from structural members or it can be bottom-supported in virtually all counter-flow cooling towers, regardless of a cooling tower's age or manufacturer.

PACKING AND DELIVERY