With a feed stroke of 2000 mm, this small water well drill is able
to drill deep underground and reach even the most remote water
sources. In addition, it can operate quickly and efficiently with a
rotation speed between 45 and 65 RPM.
The RCF260WT drill is extremely economical thanks to its powerful
engine and efficient design. It has the ability to drill even in
the most difficult terrains.
One of the most important features of this equipment is its low air
consumption. Its air consumption rate is between 17 and 31 cubic
meters per minute.
Features:
1. The drilling rig and the tractor are integrated. The tractor is
both a transport vehicle and an assembly. When going to the work
site, the air compressor can be dragged behind the platform. Only a
tricycle is needed to load the drill rod. This saves the investment
in the transport vehicle and is more convenient for delivery. Due
to the small size and flexible design of the tractor, it is more
suitable for use in wilderness, outside the village and other
places.
2. The 200-type drilling rig uses the tractor as the carrier and
hydraulic pressure as the working power of the equipment. With the
power of the 40-horsepower diesel engine of the tractor, 200 meters
of drilling can be easily completed. At the same time, when lifting
the rod, there is no need to turn on the air compressor, only the
hydraulic pressure can be turned on to lift the rod. Therefore, the
drilling cost is low and the economic benefit is high.
3. The machine adopts mechatronics technology and adopts a keypad
operating device. The operation mode is simpler and more flexible.
The operator can freely choose the location of the workstation
according to his own wishes, without being restricted by the
installation, and can realize instant inching. The improved version
of the machine realizes wireless remote control operation, which is
more convenient to operate.
4. Only two people are needed to operate the drilling rig - guiding
the drilling rig and replacing the drill rod can complete all the
work, saving labor.
5. The drilling rig can also make casing while drilling, and the
drilling rig is equipped with a guard plate quick connection
socket.
Technical Parameters:
| Product Name: | Mobile Tractor Mounted Water Drilling Machine/Borehole Drilling
Machine |
| Travelling Speed (km/h): | 30 |
| Output Torque (n.m): | 5000 -5500 |
| Rod Diameter (mm): | 76 & 89 |
| Hole Diameter (mm): | 140 - 254 |
| Dimension (mm): | 4000*1700*2700 |
| Rotation Speed (rpm): | 45 -65 |
| Lifting Force: | 12t |
| Climbing Angle: | 25 Degree |
| Rod Length (mm): | 2000 |
Applications:
This water well drilling rig machine is mainly used for geothermal
drilling, farm irrigation , house yard, gardens and water well
drilling, drilling diameter is 70-350mm, and drilling depth is 100m
to 200m. It also can be used in small building piling, like
farmhouse or factory, the drilling diameter can reach 500mm and
depth can be more than 60meter.
