10 shore A Soft Silicone Moulding Rubber for Soap,Candle RTV2 Tin
cure Silicone RubberDescription of silicone soap mold making RTV-2 silicon rubberRTV-2 silicone rubber is a two-component material, which consists
of Part A base silicone and Part B curing agent; Then the silicone
base and curing agent can cure at room temperature by a
condensation reaction. These silicone rubber materials can be cast
into the cured silicone mold: Plaster, polyurethane, PU, GRC,
cement, resin, polyester, wax etc.
Features of silicone soap mold making RTV-2 silicon rubber1. Good flow ability(16000Cps) and long working time(30~40 min)
2. Low hardness, easy de-mold
3. High tear and tensile strength
4. Low linear shrinkage(0.03%)Applications of silicone soap mold making RTV-2 silicon rubberMCSIL-215/218 silicone rubber is suited for small or middle size
reproduction of candle mold, soap mold, small size concrete stones,
artificial stones, plaster molding, figures, art objects,
decoration molding, and the products with thin flower patterns.
Packing of silicone soap mold making RTV-2 silicon rubberPart A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle, 1kg/bottle and 10kg/bottle
Frequently asked questions of RTV silicone molds for soap makingWhy does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing
reasons: Adding too much silicone oil which will destroy the
molecular of silicone rubber; Making the mold for small and fine
detailed products with higher hardness silicone rubber which is
easy to break; Making the mold for large products with soft
silicone rubber which will reduce the tensile and tear strength of
the mold, and the mold will have deformation. Thus, we should take
the proper silicone rubber to make the mold for suitable products.
