QYGB140 Top Type / Triangle Hydraulic Breaker 140 Chisel , Suit 19-26 Tons
| QYGB TOP TYPE HYDRAULIC BREAKER |
| Item/Model | Unit | 45T | 68/70T | 75T | 85T | 100T | 135T | 140T | 150T | 155T | 165T | 175T | B185T | 195T | B210T |
| Weight | Kg | 100/120 | 298 | 421 | 577 | 973 | 1855 | 1989 | 2420 | 2750 | 3160 | 4210 | 4720 | 4190 | 6100 |
| Length | Mm | 1100 | 1347 | 1528 | 1920 | 2260 | 2695 | 2810 | 2895 | 3125 | 3310 | 3400 | 3400 | 3420 | 3700 |
| Pressure | Kg/cm² | 90-120 | 110-140 | 110-160 | 120-170 | 150-170 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 180-220 | 180-220 | 190-230 |
| Flux | L/min | 15-25 | 25-45 | 30-45 | 45-85 | 80-120 | 120-160 | 130-170 | 150-190 | 170-220 | 200-300 | 210-290 | 220-300 | 230-320 | 360-450 |
| Rate | Bpm | 700-1200 | 500-900 | 500-800 | 400-700 | 400-700 | 400-700 | 400-600 | 350-500 | 250-400 | 250-350 | 200-350 | 200-250 | 180-200 | 120-200 |
| Hose | Inch | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 1 | 1 | 1 | 1 | 1 | 1.25 | 1.25 | 1.25 | 1.25 |
| Chisel | Mm | 45 | 68/70 | 75 | 85 | 100 | 135 | 140 | 150 | 155 | 165 | 175 | 185 | 195 | 210 |
| Suit | Ton | 1.2-3.0 | 4-8 | 6-8 | 7.0-14 | 10-16 | 18-26 | 19-26 | 27-38 | 28-35 | 36-45 | 40-55 | 50-60 | 55-65 | 65-100 |
| QYGB TRIANGLE TYPE HYDRAULIC BREAKER |
| Item/Model | Unit | 45S | 68/70S | 75S | 85S | 100S | 135S | 140S | 150S | 155S | 165S | 175S | 185S | 195S | 210S |
| Weight | Kg | 90/110 | 254 | 380 | 510 | 765 | 1668 | 1805 | 2228 | 2580 | 2755 | 3910 | 4135 | 4650 | 5860 |
| Length | Mm | 1100 | 1347 | 1528 | 1920 | 2260 | 2695 | 2810 | 2895 | 3125 | 3310 | 3400 | 3400 | 3420 | 3700 |
| Pressure | Kg/cm² | 90-120 | 110-140 | 110-160 | 120-170 | 150-170 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 180-220 | 180-220 | 190-230 |
| Flux | L/min | 15-25 | 25-45 | 30-45 | 45-85 | 80-120 | 120-160 | 130-170 | 150-190 | 170-220 | 200-300 | 210-290 | 220-300 | 230-320 | 360-450 |
| Rate | Bpm | 700-1200 | 500-900 | 500-800 | 400-700 | 400-700 | 400-700 | 400-600 | 350-500 | 250-400 | 250-350 | 200-350 | 200-250 | 180-200 | 120-200 |
| Hose | Inch | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 1 | 1 | 1 | 1 | 1 | 1.25 | 1.25 | 1.25 | 1.25 |
| Chisel | Mm | 45 | 68/70 | 75 | 85 | 100 | 135 | 140 | 150 | 155 | 165 | 175 | 185 | 195 | 210 |
| Suit | Ton | 1.2-3.0 | 4-8 | 6-8 | 7.0-14 | 10-16 | 18-26 | 19-26 | 27-38 | 28-35 | 36-45 | 40-55 | 50-60 | 55-65 | 65-100 |
Product application range:
1. Mining: mountain excavation, mining, secondary crushing, grid screen crushing.
2. Metallurgy: steel ladle, slag cleaning, furnace dismantling, equipment foundation demolition.
3. Highway: highway repair, cement road crushing, foundation excavation.
4. Railway: mountain excavation, tunneling, road and bridge demolition, roadbed compaction.
5. Construction: demolition of old buildings and crushing of reinforced concrete.
6. Ship tire repair: hull to remove mussel, remove embroidery.
7. Others: ice breaking, frozen soil, sand mold vibration.
Frequently asked question:
1: Which payment terms are acceptable?
A: For payment terms, T/T.
2: How about delivery time?
A: 5-8 days after receipt of payment.
3: How long is the warranty?
A: 12 months after delivery.
4. What is the minimum order quantity?
A: The minimum order quantity is 1 piece.
5: Which country have you been exported?
A: Russia, USA, Canada, Japan, Korea, Malaysia, India, Indonesia, Australia, New Zealand, Israel, South Africa etc.
6.Are you sure your product will fit my excavator?
A: Our equipment are suitable for most excavators. Show us your excavator model, we will confirm the solution.
7.Can you produce according to customers' design?
A: Sure,OEM/ODM service available. We have factories for long-term cooperation.
Hammer key number
| Number | Parts Name | Number | Parts Name | Number | Parts Name |
| 1 | Back Head | 25 | Grease Nipple | 49 | Socket Plug |
| 2 | Charging Valve | 26 | Rod Pin | 50 | Heli Sert Coil |
| 3 | O-Ring | 27 | Stop Pin | 51 | Socket Bolt |
| 4 | Cylinder | 28 | Rubber Plug | 52-1 | Accumulator Body |
| 5 | Seal Retainer | 29 | Front Head Pin | 52-2 | 0-Ring |
| 6 | O-Ring | 30 | Ring Bush | 52-3 | Back-Up Ring |
| 7 | Socket Plug | 31 | Front Cover | 52-4 | Diaphragm |
| 8 | Gas Seal | 32 | Rod Moil Point | 52-5 | 0-Ring |
| 9 | Step seal | 33 | Washer | 52-6 | Charging VV |
| 10 | 0-Ring | 34 | Through Bolt | 52-7 | 0-Ring Car |
| 11 | Buffer Seal | 35 | Hex Nut | 52-8 | 0-Ring |
| 12 | Piston | 36 | Air Check valve | 52-9 | 0-Ring Plug |
| 13 | Dust seal | 37 | Q-Ring | 52-10 | Accumulator Cover |
| 14 | U-Packing | 38 | Q-Ring | 52-11 | 5ocket Bolt |
| 15 | Buffer Seal | 39 | Hollow Hex Plug | 52-12 | Holder(A) |
| 16 | 0-Ring | 40 | Rubber plug | 52-13 | Holder(B) |
| 17 | Adapter | 41 | Snap Ring | 52-14 | Holder(C) |
| 18 | Union Cap | 42 | Knock Pin | 52-15 | Holder Pin |
| 19 | Valve | 43 | Hex Head Plug | 52-16 | Holder Nut |
| 20 | Valve Plug | 44 | ROund Nut | 52-17 | Center Pin |
| 21 | 0-Ring | 45 | ROund Nut | 53 | O-Ring |
| 22 | 0-Ring | 46 | Back-Up Ring | | |
| 23 | Valve Sleeve | 47 | Valve Adjuster | | |
| 24 | Front Heac | 48 | Nut | | |
| Number | Parts Name | Number | Parts Name | Number | Parts Name |
| 1 | Cylinder | 29 | O-RING | 55 | BACK-UP RING |
| 2 | M24 HELI-SERT INSERT | 30 | BACK-UP RING | 56 | 14 FINE SOCKET BOLT |
| 3 | M20 HELI-SERT INSERT | 31 | 1 PLUG | 57 | CHARGE VALVE |
| 4 | 140 U-PACKING | 32 | VALVE ADJUSTER | 58 | 0-RING |
| 5 | 140 BUFFER RING | 33 | O-RING | 59 | PLUG |
| 6 | 140 DUST SEAL | 34 | BACK-UP RING | 60 | O-RING |
| 7 | SEAL RETAINER | 35 | 24 FINE SOCKET BOLT | 61 | 1/2 PLUG |
| 8 | 135 SLDE PACKING | 36 | 20 SOCKET BOLT | 62 | O-RING |
| 9 | O-RING | 37 | O-RING | 63 | THROUGH BOLT |
| 10 | 135 SEAL RINE | 38 | O-RING | 64 | NUT |
| 11 | 135 BACK-UP RING | 39 | O-RING | 65 | WASHER |
| 12 | O-RING | 40 | 45 FACE SEAL | 66 | HEXAGON NUT |
| 13 | BACK-UP RING | 41 | FRONT COVER | 67 | ACCUMULATOR COVER |
| 14 | KNOCK PIN | 42 | FRONT HEAD | 68 | ACCUMULATOR BODY |
| 15 | BUSHING | 43 | FRONT BUSHING | 69 | DIAPHRAGM |
| 16 | 0-RING | 44 | THRUST RING | 70 | VALVE |
| 17 | STROKE ADJUSTER | 45 | ROD PIN | 71 | CAP |
| 18 | 22 NUT | 46 | STOP PIN | 72 | PLUG |
| 19 | 0-RING | 47 | RUBBER PLUG | 73 | O-RING |
| 20 | BACK-UP RING | 48 | FRONT HEAD PIN | 74 | 80 FACE SEAL |
| 21 | 1/4 PLUG | 49 | RUBBER PLUG | 75 | 24 SOCKET BOLT |
| 22 | O-RING | 50 | SNAP RING | 76 | 18 SOCKET BOLT |
| 23 | PLUG | 51 | 1/4 GREASE NIPPLF | 77 | DUST PLUG |
| 24 | PISTON | 52 | BLUNT | | HOSE WHIP ASSEMBLY |
| 25 | VALVE | 52 | MOIL | | SEAL KIT |
| 26 | VALVE PLUG | 52 | CHISEL | | SERVLCE TOOL KIT |
| 27 | VALVE HOUSING | 53 | BACKHEAD | | |
| 28 | VALVE HOUSING OVER | 54 | FLANGE ADAPTEE | | |
| Number | Parts Name |
| 1 | SIDE BRACKET |
| 2 | SET PLATE |
| 3 | GUIDE PLATE |
| 4 | SIDE BOLT |
| 5 | SIDE NUT |
| 6 | WASHER |
| 7 | SUPPORT BAR |
| Number | Parts Name | Number | Parts Name |
| 1 | FRAME | 17 | SIDE WEAR PLATE |
| 2 | WINDOW COVER-H | 18 | W/P HOLDER |
| 3 | WINDOW COVER-L | 19 | DOWN CUSHION |
| 4 | HOSE COVER | 20 | DISH SPRING WASHER |
| 5 | PIN PLUG | 21 | SOCKET BOLT |
| 6 | ROD PLUG | 22 | SOCKET BOLT |
| 7 | GREASE PLUG | 23 | WASHER |
| 7-1 | GREASE PLUG | 24 | UPPER CUSHION |
| 8 | CHECK PLUG | 25 | GREASE NIPPE |
| 9 | HOSE PLUG | 26 | GREASE ADAPTER |
| 10 | WINDOW PLUG | 27 | NUT |
| 11 | SIDE BOLT | 28 | OIL HOSE |
| 12 | SIDE NUT | 29 | G-ADAPTER |
| 13 | WASHER | 30 | O-RING |
| 14 | SUPPORT BAR | 31 | SUPPORT SHIM |
| 15 | SUPPORT WEAR PLATE | 32 | W/P SHIM |
| 16 | INNER WEAR PLATE | 33 | INNER WEAR PLATE(D/C) |
About us:
Our company adheres to the core values of "eficiency first, technology leading’, adheres to technological and management innovation, comprehensively promotes excellent performance management and lean production methods (LPS), implements precision marketing and brand strategy, and continuously improves comprehensive operational eficiency. The company and its products have successively passed BV certification, SGS certfication, and CE certificaton. Qualty is the life of the enterprise. Seizing the source of quality, we strictly control the quality of self-made parts and production processes in production.
As a professional domestic manufacturer of hydraulic breaker parts. Our company produces parts with the best rawmaterials, such as xingcheng, xining and other first-class alloy steel, so that the products have more strong wear and fatigue resistance. We cooperate with PARKER and other first-class brand seal kit suppliers to improve the sealing performance of products.
