Introduction of smart pressure transmitter:
The BPHT24-III digital intelligent pressure transmitter is
comprised of a smart sensor and a smart electronic board. The smart
sensor includes a silicon piezoresistive pressure sensor, measuring
diaphragm detection circuit, temperature sensor, and temperature
compensation circuit. The intelligent circuit board consists of a
microcomputer controller and peripheral circuits, which facilitate
the conversion of pressure signals into electrical signals. This
high-precision pressure measurement device utilizes unique flat
film technology to ensure accurate measurements with exceptional
stability and reliability across a wide temperature range. It finds
extensive applications in industrial automation, environmental
protection, energy, and other relevant fields.
Product Features of smart pressure transmitter:
1. Wide measuring range
2. Various output signal forms
3. Adjustable zero point and full scale
4. High Accuracy and stability
Applications of smart pressure transmitter:
1. This transmitter is commonly used in industries such as
petroleum, chemical, metallurgy, power generation, and hydrology.
2. It is designed for precise pressure measurement and control in
challenging outdoor industrial environments.
| Performance Parameters of smart pressure transmitter |
| Measurement Range | 0kPa ~10kPa…20MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | ≤±0.1%FS |
| Hysteresis | ≤±0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | Aluminum Alloy |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex db IIC T6 Gb |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~1.2kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
1. When selecting the product, please ensure that the medium to be
measured is compatible with the contact parts of the product.2. When placing an order, please note that explosion-proof type
products do not include digital display heads.3. When ordering transmitters with an LCD or LED display head, the
power supply for the transmitter should not be lower than 20VDC.
