Blower used for pneumatic conveying in water treatment
Product Features
The helical construction uses the stator helical methodthat the
screen lines of casing at the suction and dischargesides are cut to
a helical shape,and the triangle suctionand discharge port formed
by a straight line of the rotortop is to be opened and closed
gradually.
Therefore,the suction and discharge ports of this type is not
opened or closed at moments,which makes theseblowers have an only
limited operation sound and almost free from pulsations from
discharge.
The rotors are three-lobe straight type,so that therotors can not
interfere with each other,resulting from minor displacements in the
thrust direction as in the helical type.Therefore,the clearance
between the rotors should be assured in the profile direction only
and thus there is no necessity of an excessive clearance on aocount
of displacements in the thrust direction as in case of the rotor
helical type.From such reasons,these blowers have a very high
efficiency,in comparison with the rotor helical type of same
dirmensions.
By adoption of an unique profile of rotor,the clearance between the
rotors can be held to be constant,which makes the efficiency even
higher.
The precision of rotors is fully controlled and variation of
precision between blowers is almost nil because the rotors are
produced under the mass production control by utilizing a prenision
NC maching.In addition, the rotors are dynamically balanced in the
fabrication stage already ,so that these rotors are almost free
from vibrations as in the case of conventional rotors which are
still unbalanced .
The advancedest driving gears are adopted not only to extend the
use life but also to make noise lower.The gears are made in special
Cr-Mo steel by hardening treatmentc and are made according with
gear precision of JISIl first-class,Therefore,the harmful
disturbances to products from gears are avoided.
The transported air is clean and is any oil-cust free oil
lubrication is not needed in casing and the structure design
prerent the bearing oil and gear oil from entering the casing.
With the establishment of quality management system and manufacture
management system,the aims of parts exchanging,less production cost
and rapid delivery are realized.The blowers of right quantity are
keeped in stock to make delivery in time.
Key Advantages
The newly developed blower, which is most suitable for water
treatment and pneumatic conveying, has been deeply developed and
carefully designed for optimal energy saving. Compared with the
original series, each blower has a maximum energy saving of over
30% and an average energy saving of over 10%.
- Compact design
- Low noise and low vibration design
- Compatibility of replacement and convenience of maintenance
Scope of application
It is suitable for sewage treatment industry, petrochemical
industry, food and industry, textile industry, metallurgy industry,
cement and construction materials industry, printing and dyeing
industry and other industries.
Market Distribution
We have 42 offices throughout the country, in addition to Taiwan
Province, 33 provinces in the country's ad-ministrative regions
have a sound sales and service network. We can provide you with
pre-sale, in-sale and after-sales service in a timely and
convenient manner, understand your needs, and constantly improve
the service and quality system while meeting the customized needs
of customers.
High Performance Aerodynamic Design Methodology for Wide Service
Conditions
By studying the influence of impeller and volute flow on efficiency
and working stability, the R&D team proposed a flow control
method and a pneumatic optimization design method to improve the
performance of the main engine, which greatly improved the
efficiency of the main engine.
Manufacturing & Equipment Base
has built laboratories, R& D buildings, processing workshops, etc.,
with internationally advanced and China leading high-precision
processing equipment.
Examples of uses
