Natural Marble and Aluminum Honeycomb Composite Panel for Wall
Cladding and Decoration
Key Words
Aluminum Wall cladding panel, honeycomb panel, sandwich panel,
marble, stone, granite, composite material, wall cladding, metal
wall panel, Aluminum wall panel, aluminium wall panel, exterior
wall panels, Aluminum sheet, curtain wall panel, Wall panel, metal
wall cladding, aluminum curtain wall panel, aluminum curtain wall
cladding panel, Metal panel, aluminum wall cladding, Aluminum
composite panel, wall cladding panel, Perforated aluminum sheet,
Wall aluminum cladding, Aluminum Plate, Perforated aluminum panel,
Aluminum Panel, Aluminum composite sheet, Aluminum ceiling panel,
Aluminum ceiling, aluminum cladding, Aluminum cladding panel,
aluminum facade panel, Ceiling panel, Ceiling tile, Aluminum
honeycomb composite panel, Aluminum honeycomb panel, Metal cladding
panel, Corrugated Aluminum Sheet, aluminum coil, aluminum plate,
building material, decoration material, construction material, ACP,
Aluminum composite material, ACM, aluminium composite panel
Descriptions of Marble-Aluminum Honeycomb Composite Cladding
The marble/stone/granite aluminum honeycomb panel is made from thin
natural marble, granite or stone sheets, aluminum sheets and
aluminum foil honeycomb by bonding with polymer adhesive in
sandwich laminating way. It is a very good alternative material of
natural stone, marble or granite with much lower weight and cost in
the same thickness.
This kind of aluminum composite panels is very popular for luxury
building decoration at more competitive budget.
Specifications
Surface finish: 3mm to 10mm thick natural stone, marble or granite
Aluminum alloy: A1100 or A3003
Aluminum sheets: 0.5mm to 1.0mm thickness
Core: 5mm to 200mm aluminum foil honeycomb
Total panel thickness: 8mm-210mm
Maximum size: 1.5mx3m
Items | Exterior Panels | Interior Panels |
|---|
| Width | Up to 1600mm, subject to width limitation of specific stone, marble
or granite |
| Length | Up to 3000mm, subject to length limitation of specific stone, marble or granite |
| Thickness | Customizable |
| Surface Finishes | Polished, Honed, Flamed, Bush Hammered, etc |
| Flatwise Tensile Strength | 1.6Mpa | 0.8Mpa |
| Flatwise Compressive Strength | 1.0Mpa | 0.8Mpa |
| Flatwise Shear Strength | 1.0Mpa | 0.8Mpa |
| Flatwise Compressive Elastic Modulus | 35Mpa | 30Mpa |
| Flexural Strength | 8Mpa | 4Mpa |
| Drum Peeling Strength | 60N.mm/mm | 50N.mm/mm |
| Weather Resistance | -40 degree Celsius to 80 degree Celsius |
Installation
The marble aluminum honeycomb cladding panels are generally
assebled with aluminum profile hangers or brackets which are used
for fixing the panels to the subframes of building. It's very easy
to install the panels with a little workforce.
What is honeycomb, and why do we apply it to marble or natural
stone?
At RENOXBELL, we use the honeycomb panel with a hexagonal core to
create ultra-light, strong and large sheets of marble or natural
stone.
This solution consists in manufacturing a composite panel made by
the following layers:
1, A thin layer of marble, granite or other stone
2, A sheet of an ultra-light and resistant reinforcing material
such as aluminium or fiberglass or HPL.
3, A layer of hexagonal honeycomb aluminum foil.
4, Another sheet of ultra-light and resistant reinforcing material,
equal to point 2.
The set forms a composite with a natural stone skin that offers
extraordinary mechanical and physical properties for marble or
stone coatings.
Why do we apply honeycomb to marble and natural stone?
In the case of interior design or general marble and stone
cladding, honeycomb provides the strongest support with the lowest
possible weight. Three factors previously irreconcilable in marble
and stone cladding are related in the most optimized way possible:
Low weight + High Resistance = Large Format
Honeycomb applied to marble, and natural stone thus guarantees
great functionality. It gives wings to the creativity of interior
designers, furniture designers, facadists, naval interior
designers, and architects.
