** Datasheet Download **
6.2 Inch 1024*600 IPS TFT LCD RGB Interface Product Introduction
The RGB interface is a traditional parallel interface. It transmits
the signals of the red, green, and blue color channels separately,
and displays the image by synthesizing the signals of these three
channels. The RGB interface has the characteristics of stable
signal transmission and accurate color reproduction. It is suitable
for applications with high color requirements, such as industrial
design, advertising display, etc. The cost of RGB interface is
relatively low, and there are many signal lines, which can provide
more control signals and facilitate connection with various control
devices.
This model SFTO620BH-7180AN features a 6.2-inch diagonal RGB
interface display, 1024 * 600 dot matrix, and IPS technology,
allowing users to experience a perfect visual experience from
different angles. Its operating voltage is only 3V-3.6V, with a
typical voltage of 3.3V and a surface brightness of 1000nits. Users
can add RTP or CTP on the display screen to enhance the
human-computer interaction effect.
Features
Characteristics
| Size | 6.2 inch |
| Resolution | 1024(horizontal)*600(Vertical) |
| Interface | 24BIT RGB |
| Connect type | Connector |
| Color Depth | 16.7M |
| Technology type | a-Si |
| Pixel pitch (mm) | 0.13425x0.12872 |
| Pixel Configuration | R.G.B. Vertical Stripe |
| Display Mode | Normally Black |
| LCD Driver IC | - |
| Viewing Direction | IPS, All viewing angles |
| Gray Scale Inversion Direction | ALL |
Mechanical
| LCM (W x H x D) (mm) | 143.37*87.13*2.56 |
| Active Area(mm) | 137.472 x 77.232 |
| With /Without TSP | Without TSP |
| Weight (g) | TBD |
| LED Numbers | 20LED |
6.2 Inch 1024*600 IPS TFT LCD RGB Interface Product Drawing
Interface Pin Description
| Pin.No | Symbol | Function |
| 1,2 | VLED+ | Power for LED backlight (Anode) |
| 3,4 | VLED- | Power for LED backlight (Cathode) |
| 5 | GND | Power ground |
| 6 | NC | Not connect |
| 7 | DVDD | Digital Power |
| 8 | NC | Not connect |
| 9: | DE | Data Enable signal. |
| 10 | VSD | Vertical sync input. Negative polarity |
| 11 | HSD | Horizontal sync input. Negative polarity |
| 12-19 | B7-R0 | Blue Data |
| 20-27 | G7-G0 | Green Data |
| 28-35 | R7-R0 | Red Data |
| 36 | GND | Ground |
| 37 | DCLK | Colock signal |
| 38 | GND | Display on/off |
| 39 | SHLR | Left or Right Display Control |
| 40 | UPDN | Up / Down Display Control |
| 41 | NC | Not connect |
| 42 | NC | Not connect |
| 43 | VPP | OTP Power(+7.8V) |
| 44 | RSTB | Global reset pin. Active low to enter reset state.OTP reset Suggest
to connecting with an RC reset circuit for stability. Normally pull
high. (R=10KΩ , C=1μF) |
| 45 | SCL | OTP Serial clock input |
| 46 | NC | Not connect |
| 47 | NC | Not connect |
| 48 | GND | Power ground |
| 49 | SDA | OTP Serial data input |
| 50 | CS | OTP Chip select pin |
Absolute Maximum Ratings
| Item | Symbol | MIN | MAX | Unit |
| Supply Voltage | VDD | -0.3 | 5.0 | V |
| Input Signal Voltage | Vin | -0.3 | VDD+0.3 | V |
| Logic Output Voltage | VOUT | -0.3 | VDD+0.3 | V |
| Operating Temperature | TOPR | -30 | 80 | ℃ |
| Storage Temperature | TSTG | -30 | 80 | ℃ |
Driving Backlight
| Item | Symbol | MIN | TYP | MAX | Unit |
| LED current | IF | - | 100 | - | mA |
| Power Consumption | | | - | - | mW |
| LED Voltage | VF | - | 24 | - | V |
| LED Life Time | WBL | 25000 | | - | Hr |
Optical Characteristics
| Items | Symbol | Condition | Min. | Typ. | Max. | Unit |
Viewing angles | θT |
Center CR≥10 | - | 80 | - |
Degree. |
| θB | - | 80 | - |
| θL | - | 80 | - |
| θR | - | 80 | - |
| Contrast Ratio | CR | Θ =0 | 800 | 1000 | - | - |
| Response Time | TON | 25.C | - | 30 | 35 | ms |
| TOFF | - | - | - |
Chromaticity | White | XW |
Backlight on | - | 0.309 | - | - |
| YW | - | 0.347 | - | - |
| Red | XR | - | - | - | - |
| YR | - | - | - | - |
| Green | XG | - | - | - | - |
| YG | - | - | - | - |
| Blue | XB | - | - | - | - |
| YB | - | - | - | - |
| Uniformity | U | | 80 | - | - | % |
| NTSC | | | | 50 | | % |
| Luminance | L | | 800 | 900 | 1100 | |
6.2 Inch 1024*600 IPS TFT LCD RGB Interface Product Image
Environmental / Reliability Tests
| No | Test Item | Condition | Remarks |
1 | High Temperature Operation | Ts= +80℃ , 240hrs | Note 1 IEC60068-2-2, GB2423. 2-89 |
| 2 | Low Temperature Operation | Ta= -30℃ , 240hrs | Note 2 IEC60068-2-1 GB2423.1-89 |
| 3 | High Temperature Storage | Ta= +80℃ , 240hrs | IEC60068-2-2 GB2423. 2-89 |
| 4 | Low Temperature Storage | Ta= -30℃ , 240hrs | IEC60068-2-1 GB/T2423.1-89 |
| 5 | High Temperature & Humidity Storage | Ta= +60℃ , 90% RH max, 160 hours | IEC60068-2-3 GB/T2423.3-2006 |
6 | Thermal Shock (Non-operation) | -30℃ 30 min ~ +80℃ 30 min Change time: 5min, 30 Cycle | Start with cold temperature, end with high temperature IEC60068-2-14, GB2423.22-87 |
7 | Electro Static Discharge (Operation) | C=150pF, R=330 Ω , 5 points/panel Air:±8KV, 5 times; Contact: ±4KV, 5 times; (Environment: 15℃ ~ 35℃ , 30% ~ 60%, 86Kpa ~ 106Kpa) | IEC61000-4-2 GB/T17626.2-1998 |
8 |
Vibration (Non-operation) | Frequency range: 10~55Hz, Stroke: 1.mm Sweep: 10Hz~55Hz~10Hz 2 hours for each direction of X .Y. Z. (package condition) | IEC60068-2-6 GB/T2423.5-1995 |
| 9 | Shock (Non-operation) | 60G 6ms, ± X, ±Y , ± Z 3 times for each direction | IEC60068-2-27 GB/T2423.5-1995 |
| 10 | Package Drop Test | Height: 80 cm, 1 corner, 3 edges, 6 surfaces | IEC60068-2-32 GB/T2423.8-1995 |
Facilities and Certificates
